Pump character:

1: Double stage and high speed directly connected structure.

2: Equipped with specially designed air ballast valve to prevent water mixing with oil pump and prolong pump working time.

3: Adopt international similar product design,small size,light weight,low noise,easy to start,long time stable operation.

4: No oil leakage, no oil injection and environmentally friendly.

5: The pump can be used as a suction pump alone, also can be used as a backing pump for booster pump, diffusion pump and molecular pump,also can be used as maintenance pump or forepump in the system.

6: It is widely used in the electric vacuum device manufacturing industry, refrigeration industry, medical analysis device industry, solar energy industry, electric light source industry, vacuum furnace industry and scientific research unit.

Pump specifications:




Note:
 
1. The pump is one of the basic equipments to exhaust a sealed vessel. It can be used either independently as main and can also be served as forepump for booster pump diffusion pump and molecular pump or as holding pump for a vacuum system and as a pre-pumping for different kinds of the pumps. So that is can be applied in electro-vacuum industries, vacuum flask manufacturing, vacuum welding and as an accessory to those fine gauges or meters where vacuum is required .It is more suitable for laboratory use because of its small size ,less weight and quiet operation .

2.The pump is allowed to work continuously for many hours at a stretch under atmospheric temperature of 5ºC-40ºC and intake pressure below 1230pa.While the pumped gas containing moisture of a relative humidity of more than 90% gas-ballast valve should be open.

3. Whit the inlet port widely opened to atmosphere the pump is not allowed to work more than one minute.

4.The pump is not suitable for pumping over-oxidized, poison, explosive and corrosive gas as well as gases which react chemically with the pump oil contain particles of dust.

Company power:


Our services:

Pre-Sales Service

1. Provide 24-hour reply.

2. Provide suitable models according to clients' requirements.

3. Provide detailed product specifications and reasonal prices. 

In-Sales Service

1. Supervise whole production time. 

2. Provide product's testing performance curve to customers.

3. Provide inspection pictures to customers after we finish production.

After-Sales Service

1. Provide installation manual.

2. Under correct installation, normal maintenance and using,we guarantee one-year warranty.

3. If product has malfunction,we'll reply you within 24 hour and provide solution or even send technical staff to spot after receiving maintenance notification.
    

Contact:

  Pump character:

1: Double stage and high speed directly connected structure.

2: Equipped with specially designed air ballast valve to prevent water mixing with oil pump and prolong pump working time.

3: Adopt international similar product design,small size,light weight,low noise,easy to start,long time stable operation.

4: No oil leakage, no oil injection and environmentally friendly.

5: The pump can be used as a suction pump alone, also can be used as a backing pump for booster pump, diffusion pump and molecular pump,also can be used as maintenance pump or forepump in the system.

6: It is widely used in the electric vacuum device manufacturing industry, refrigeration industry, medical analysis device industry, solar energy industry, electric light source industry, vacuum furnace industry and scientific research unit.

Pump specifications:




Note:
 
1. The pump is one of the basic equipments to exhaust a sealed vessel. It can be used either independently as main and can also be served as forepump for booster pump diffusion pump and molecular pump or as holding pump for a vacuum system and as a pre-pumping for different kinds of the pumps. So that is can be applied in electro-vacuum industries, vacuum flask manufacturing, vacuum welding and as an accessory to those fine gauges or meters where vacuum is required .It is more suitable for laboratory use because of its small size ,less weight and quiet operation .

2.The pump is allowed to work continuously for many hours at a stretch under atmospheric temperature of 5ºC-40ºC and intake pressure below 1230pa.While the pumped gas containing moisture of a relative humidity of more than 90% gas-ballast valve should be open.

3. Whit the inlet port widely opened to atmosphere the pump is not allowed to work more than one minute.

4.The pump is not suitable for pumping over-oxidized, poison, explosive and corrosive gas as well as gases which react chemically with the pump oil contain particles of dust.

Company power:


Our services:

Pre-Sales Service

1. Provide 24-hour reply.

2. Provide suitable models according to clients' requirements.

3. Provide detailed product specifications and reasonal prices. 

In-Sales Service

1. Supervise whole production time. 

2. Provide product's testing performance curve to customers.

3. Provide inspection pictures to customers after we finish production.

After-Sales Service

1. Provide installation manual.

2. Under correct installation, normal maintenance and using,we guarantee one-year warranty.

3. If product has malfunction,we'll reply you within 24 hour and provide solution or even send technical staff to spot after receiving maintenance notification.
    

Contact:

 

Gas-Phase Ultrasonic Cleaning Machine

The principle of gas-phase cleaning machine is as follow. When the solvent is heated, the steam forms the gas phase zone. In this area, the oil on the surface of the workpiece is dissolved and washed by steam. When the steam condenses, the dirt along with the grease falls back into the tank to become the cleaning fluid. Then, the cleaning fluid is heated and gasified into steam to clean the workpiece. This continuous cycle ensures the workpiece is always surrounded by the steam of cleaning fluid which overcomes the problem of contaminated cleaning fluid in the past common cleaning process.

Heat Exchanger Cleaning Agent/Metal Decreasing Agent

Trichloro ethylene, tetrachloro ethylene, dichloromethane,  isopropyl alcohol have very good cleaning effect with high stability, long usage period when they are used as metal cleaning agent. In Heat Exchanger factories, these degreasing agents are widely applied in cleaning fins, bars, parting plates, tanks and other Heat Exchanger Parts . After these heat exchanger parts with oil stain are soaked in the cleaning agent and cleaned by supersonic, they`ll be very clean which also ensure heat exchanger with good brazing quality.

Heat Exchanger Cleaning

Heat Exchanger Cleaning,Heat Exchanger Tube Cleaning,Ultrasonic Automatic Cleaning Machine,Cleaning Of Tube Heat Exchangers

Wuxi Better Technology Co., Ltd , http://www.btheatexchanger.com