With the widespread popularity of garbage trucks in the country, from the earliest sealed garbage trucks to the diversification of today's removable containers, trash cans and other forms of existence. As a garbage truck with strong applicability, the compressed garbage truck has been widely recognized and designated for procurement. Such a garbage truck not only has the garbage collection function of the public garbage truck, but also effectively performs the first compression processing during the garbage collection process. To make the same car body volume, it can load more waste materials.
Today, the author will introduce the style and selection of garbage collection system for garbage trucks and introduce them in depth.
The garbage loading system for compressed garbage trucks is mainly divided into front loading type and rear loading type. Due to the front loading garbage system, the attached hydraulic lifting rack lifts the bin upside down, inevitably causing secondary pollution. Because the front-loading garbage system is used as a single supporting trash can, it is generally recognized by the majority of car users as "flashy design" and "brain-residual equipment."
The current garbage loading system for compacted garbage trucks is mainly concentrated on the rear-loading garbage system. For different operating environments, the rear-loading garbage system is mainly divided into two categories: garbage bucket and flip rack type.
Garbage bucket:
Rubbish bucket type: mainly relying on the form of hydraulic flip, the rubbish bucket is flipped and laid flat. After the artificial garbage is filled, the rubbish bin is inverted and dumped into the outer box body. The rubbish scraper collects the rubbish into the box body and smashes and compresses the rubbish bin. Store the rubbish and transport it for disposal.
Flip frame type:
Flip rack type: mainly equipped with a trash can turnover frame at the rear of the outer car body, supporting a plastic PVC trash can or an iron trash can, dumping the trash in the drum to the outer box body, and collecting garbage from the trash scraper into the box body. Crushing compresses rubbish and transports it for disposal.
The above two types of after-loading garbage systems have their own characteristics and are very effective for the actual operation needs of the localities. I believe that you can correctly purchase the garbage trucks that you really need from the above introduction.
Obligation to provide you with: hanging garbage trucks, 2 tons -15 tons compressed garbage trucks, 3 tons - 8 tons swing arm garbage trucks, garbage trucks and other garbage trucks and other data transmission and cost accounting quotation work.
Please call the sales department on 0722-7604999 . Professional sales staff will provide all the warm services for your car purchase.
In the silicone industry, to meet the user experience of the majority of consumers, multi-color products have always been the best-selling products, the process is used in silicon materials bonding and plastic bonding.
1. Soft and hard plastic two-color design
The two materials must have a certain temperature difference in the melting point. Generally, it is recommended to reach 60°. It is recommended to be at least 30°. The melting temperature of the first shot material is high. Generally, the first shot is PC or PC/ABS, and the second shot is TPU or TPE, PC thickness is 0.6-0.7mm, soft rubber part thickness is required to be 0.4mm or more.
Try to widen the contact area, make grooves to increase the adhesion, or use the core for the first shot, and the second part of the material is injected into the first shot. The surface of the first shot is as rough as possible.
2. Material compatibility
Multi-color injection molded mating materials must meet two basic compatibility conditions. They are compatible with the adhesive compatibility and processing.
3. Transparent and non-transparent two-shot design
(1) Double shot design of small lenses
The first shot is non-transparent, and the second shot is made of a lens. The first shot uses a PC with a high melting point and the second shot uses a PMMA.
(2) Transparent and non-transparent bijective design for decoration
The first shot is a non-transparent material, the second shot is a transparent material, and the non-transparent material is generally a high temperature of the PC material of SABIC, and the second shot transparent material is PMMA or PC. The PC needs to be sprayed with UV to protect it. PMMA can choose uv or fortification. If there are characters on the surface, you must choose UV
In the silicon bonding area, several silicon materials will be used to achieve different color silicon, different rubber components, so the multi_k color process is commonly used and is quite popular.
Multi Color Molding,Multi Colour Injection Moulding,Multi Color Injection Molding,Multicolor Injection Molding
Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com