Model NO.: KJ-A
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Clarified Water Pump
Industry: Air Conditioning Pump
Media: Clean Water
Performance: Automatic Pump
Theory: Vortex Pump
Motor Shaft: 45#/304# Stainliss Steel
Impeller: Brass/Stainless Steel/PPO
Brand: OEM
Motor Sheet: Cold Silicon Rolling Sheet
Mechanical Seal: NBR/Ceramic/Carbon
Insulation: B/F
Protection: IP44
Trademark: GORDON
Transport Package: Foam+Carton+Pallet
Specification: Jet Pump
Origin: Fu′an China
HS Code: 8413709990
Model NO.: KJ-A
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Clarified Water Pump
Industry: Air Conditioning Pump
Media: Clean Water
Performance: Automatic Pump
Theory: Vortex Pump
Motor Shaft: 45#/304# Stainliss Steel
Impeller: Brass/Stainless Steel/PPO
Brand: OEM
Motor Sheet: Cold Silicon Rolling Sheet
Mechanical Seal: NBR/Ceramic/Carbon
Insulation: B/F
Protection: IP44
Trademark: GORDON
Transport Package: Foam+Carton+Pallet
Specification: Jet Pump
Origin: Fu′an China
HS Code: 8413709990
    Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.
                                                                    Â
Technical Data
| Model | HP | W | Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size | Pressure Set (bar) |
Tank  (L) |
| KJ-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| KJ-250A | 0.35 | 250 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| KJ-370A | 0.5 | 370 | 2.4 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| KJ-550A | 0.75 | 550 | 3.5 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| KJ-750A | 1 | 750 | 4 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| KJ-1100A | 1.5 | 1100 | 4.8 | 25 | 62 | 66 | 1.5"X1.5" | 3.2 | 2 |
    Â
Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Application
>>Â Household Water Supply
>>Â Water Supply System
>>Â Cooling System
>>Â Boost System
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water.Â
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                               Â
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor.Â
Besides, thermal protector in motor will interrupt current when motor overheats.
                                                                    Â
Technical Data
| Model | HP | W | Current (A) |
Capacitor (uf) |
H.Max (M) |
Q.Max (L/min) |
Pipe Size | Pressure Set (bar) |
Tank  (L) |
| KJ-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| KJ-250A | 0.35 | 250 | 1.8 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| KJ-370A | 0.5 | 370 | 2.4 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| KJ-550A | 0.75 | 550 | 3.5 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| KJ-750A | 1 | 750 | 4 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| KJ-1100A | 1.5 | 1100 | 4.8 | 25 | 62 | 66 | 1.5"X1.5" | 3.2 | 2 |
    Â
Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Specifications: 
1 Materials: asbestos, non-asbestos, semi-metal, non-metallic, carbon, ceramic (selectable)
2 Excellent friction performance, stopping power,
3 Proper hardness and strength, good resistance to fade and wear
4 No noise, long lasting working life
5 Reasonable pricing and quality assured product
6 Surface finished: paint, powder coat; electronic paint
7 Above surface is FF non-Asbestos Brake Lining
8 Complete range of products for different vehicles
9 Able to manufacture according to customer's sample and trademark
*Related Products:Semi-Metal Brake Shoe.
Motorcycle Brake Shoe,YB100 Brake Shoe for Motorcycle,WY125 Brake Shoe for Motorcycle,Semi-Metal Brake Shoe
GREEN POWER INDUSTRY CO., LTD. , http://www.carparts-supplier.com