Safety Orbital Steering Valve 060 Series 100ml on Open Center Non Load Reactive

Safety Orbital Steering Valve 060 Series 100ml ON Open Center Non Load Reactive


Orbital Steering Valve

We produce orbitrols for low speed mobile vehicles of Construction Machinery, Agriculture Machinery, Heavy-Duty Equipment, Forestry Machinery, Mining Equipment. Replace OEM parts of Cat, John Deere, Case, Volve, Claas, David Brown, Deutz, Fendt, Ferguson, Fiat, Landini, Massey Ferguson, New Holland, Renault,Same, Ursus, Zetor, etc. Replace Danfoss Steering Valve, Eaton Char-lynn Steering Valve, M+S Steering Valve.

 

 

All of Hanjiu's orbital steering valves have a built in return-to-center function. This means that when the driver releases the wheel the tires will automatically return to the center position. This is a convenient feature that allows for slow rock crawling or driving at higher speeds. The amount of turns it takes to get from lock to lock will depend on what ram you combine with your orbital. We have included a chart that will tell you exactly how many turns it will take to get from lock to lock with the different orbital/ram combinations, with the recommended combinations in boldletters.

 

 

Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16

 

Function of the incorporated valve

 

1.  Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
2.  Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
3.  Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
4.  Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
5.  Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.

 

 

Product application

 


Shijiazhuang HanJiu technology co., LTD., is specialized in the production of BM series cycloid hydraulic motor, the BZZ redirector enterprise, my factory has dozens of high-quality, professional engineering and technical personnel, and more than in 2010, has introduced the most advanced production equipment, is in northern China's largest factories, production of more than 300000 units a year.
My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace danfoss, Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
My factory take the good faith first, quality first for the purpose, from the employee on-boarding, raw materials into the factory, from parts processing, assembly proposal until products, has a relatively perfect system of product quality. And through CE certification. Our factory is dedicated to the establishment of an internationally renowned brand, looking forward to the long-term cooperation with more demand of hydraulic products.

 

Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.
 

Safety Orbital Steering Valve 060 Series 100ml ON Open Center Non Load Reactive


Orbital Steering Valve

We produce orbitrols for low speed mobile vehicles of Construction Machinery, Agriculture Machinery, Heavy-Duty Equipment, Forestry Machinery, Mining Equipment. Replace OEM parts of Cat, John Deere, Case, Volve, Claas, David Brown, Deutz, Fendt, Ferguson, Fiat, Landini, Massey Ferguson, New Holland, Renault,Same, Ursus, Zetor, etc. Replace Danfoss Steering Valve, Eaton Char-lynn Steering Valve, M+S Steering Valve.

 

 

All of Hanjiu's orbital steering valves have a built in return-to-center function. This means that when the driver releases the wheel the tires will automatically return to the center position. This is a convenient feature that allows for slow rock crawling or driving at higher speeds. The amount of turns it takes to get from lock to lock will depend on what ram you combine with your orbital. We have included a chart that will tell you exactly how many turns it will take to get from lock to lock with the different orbital/ram combinations, with the recommended combinations in boldletters.

 

 

Main specification data
Max. System pressure --------16MPa
Max. Back pressure -----------2.1MPa
Input torque--------------------1.7~2.5Nm
Max. System operating temperature--------93º C
Recommended oil filtration--------ISO 19/16

 

Function of the incorporated valve

 

1.  Inlet safety valve: Limits maximum pressure drop across the PSU to protect the steering circuit.
2.  Cylinder port shock valve: Protects hoses against pressure surge created by ground forces on the cylinder axle.
3.  Anti- cavitation valve: Protects steering circuit against vacuum (cavitation) conditions.
4.  Inlet check valve: Prevents oil from returning through the PSU when pressure on the cylinder side is greater than the inlet side. It prevents steering wheel kick.
5.  Internal check valve: Converts the PSU to a hand operated pump for limited manual steering.

 

 

Product application

 


Shijiazhuang HanJiu technology co., LTD., is specialized in the production of BM series cycloid hydraulic motor, the BZZ redirector enterprise, my factory has dozens of high-quality, professional engineering and technical personnel, and more than in 2010, has introduced the most advanced production equipment, is in northern China's largest factories, production of more than 300000 units a year.
My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace danfoss, Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
My factory take the good faith first, quality first for the purpose, from the employee on-boarding, raw materials into the factory, from parts processing, assembly proposal until products, has a relatively perfect system of product quality. And through CE certification. Our factory is dedicated to the establishment of an internationally renowned brand, looking forward to the long-term cooperation with more demand of hydraulic products.

 

Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.
 

Cross-Flow Cooling Tower

Cooling Tower,Central Air Conditioning,Air Conditioner

Fenghua Jade Motor Co., Ltd. , http://www.chinacoolingtower.com