Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

Posted on

Model NO.: XB-OTS-150
Certificate: CE, ISO, SGS
Test Temp. Range: -65°C to +150°C
RS 232 Interface: Connect PC
Delivery Time: 20 Days After Receiving the Deposit
Refrigerant: Environmental Friendly R23/R404A
Heating / Cooling Time: RT~200°C in 35min / RT~-70°C in 90min
Controller: Programmable LCD Touch Screen
Low Temperature Shock Range: -40/-55/-65 °C
Loading Method: Static Load
System: P.I.D+S.S.R+Micro-Computer Balance
Trademark: OTS
Transport Package: Resin Fiber & Strong Wooden Case
Specification: 500*600*500mm
Origin: China
HS Code: 90248000
Fast Change Temperature Testing Equipment Double Duty Thermal Shock Test Chamber
Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

Applicable Industries:  



The Fast Change Temperature Testing Equipment Double Duty Thermal Shock Test Chamber is used to test material structures or composite materials by exposing them to extremely high and low temperatures in a continuous environment. This allows for the evaluation of thermal expansion and contraction caused by chemical and physical changes within the shortest possible time. The equipment is suitable for testing various materials such as metals, plastics, rubber, electronics, etc., providing a basis for product improvement and reference.

Inner size selection

Model XB-OTS-50 XB-OTS-80 XB-OTS-150 XB-OTS-225 XB-OTS-408
Inner Size WxHxD (cm) 36×40×35 40×50×40 50×60×50 60×75×50 80×85×60
External Size WxHxD (cm) 138x180x155 150X190X160 190x200X195 210x220X205 225x250x220

Features:
*.High-quality appearance, with an arc-shaped body, matte stripe processing, and flat handle for easy operation and safe use.

*.Multi-layer rectangular glass viewing window with anti-sweat heater device to prevent condensation, water droplets, and maintain internal lighting with PL fluorescent lamps.

*.Door with sealed packing to effectively isolate internal temperature leakage.

*.Compressor system uses France Tecumseh brand, which can effectively remove oil from the condenser pipe and capillary tube, and uses environmental protection refrigerants (R23, R404, R507).

*.Controller uses imported LED display screen, showing measured values and set time.

*.Controller with multi-segment program editor, allowing fast (QUICK) or slope (SLOP) control of temperature and humidity.

*.Built-in mobile wheels for easy movement and positioning with strong fixing screws.

Detail Specification

Shock Temperature range -65°C~150°C
Heating up time RT~200°C about 35min
Cooling down time RT~-70°C about 90min
Temp recover time/change time ≤5min / ≤10sec
Temp control accuracy/ ±0.5°C / ±2.0°C
distribution accuracy
Inner materials SUS 304# stainless steel plate for inner chamber, and stainless steel plate + spray painting for external chamber.
Insulation materials High-temperature high-density amino acid ethyl ester foam insulator material.
Systems P.I.D+S.S.R+Microcomputer balanced temperature control system.
Cooling systems Semi-hermetic two-stage compressor (water-cooled) / hermetic two-stage compressor (air-cooled).
Safety devices Fuse switch, high and low pressure protection switch compressors, refrigerant pressure protection switch failure warning system, electronic siren.
Fitting Outlook window (special purchase), upper and lower adjustable compartment two energized measured line hole, casters, level bracket.
Power 3 phase AC 380V 50HZ/60HZ
Controller Tanwan TATO or TH900C
Compressor Germany Bitzer Brand
Corresponding Standard:

GB11158    GB10589-89     GB10592-89     GB/T10586-89    GB/T2423.22-2001  GB/T2423.1-2001  GB/T2423.2-2001     GB/T2423.3-93       GB/T2423.4-93       ASTM D1735  EIA - 364-59    IEC60068-2-1.1990    IEC60068-2-2.1974      IEC 68-2-30       IEC68-2-03     EIA - 364-31C

Product View Of Fast Change Temperature Testing Equipment Double Duty Thermal Shock Test Chamber
Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

Packing & Shipping

1. Strong standard wood case, inner plastic films wrapped for High Low Temperature Shock Test Chamber
 
2. Usually we deliver the equipment by air, by sea or by express. It depends on customer's preference.

About US
Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

Our Services
We are here to help you. Services available:

Replacement manuals

  • Consumables and replacement parts
  • On-site maintenance and repair
  • Warranty support
  • Over-the-phone service support and advice

If you have an OTS chamber, we will do our best to help you in whatever way we can.  

 Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.

  • Service repair:  We prefer you contact us directly at the factory with any problems you may be experiencing. We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs. Rarely can a local contractor get all that done for you as quickly as we can. We also guarantee the work.

Temperature Fast Change Testing Equipment Thermal Shock Test Chamber

FAQ

Q1 :  Can you customize the product?

   A:   Yes, we can customize any products according to your requirements.

Q2 :  How to choose the most suitable products?

   A:   Our professional team will give you the best suggestion, just be patient to tell us the information about the parameters you require.

 Q3 :  Can you arrange installations and commissioning in your lab?

   A:   Firstly, for standard chambers, we have 3-5 days of commissioning before shipping, you just need to connect power in your lab, then you can start operating.

     Secondly, we provide detailed operation manuals with each chamber, so you can find and solve any issues yourself.

     Thirdly, for some customized chambers, we can come to install and teach your team how to operate.

Temperature Fast Change Testing Equipment Thermal Shock Test Chamber
 

If you want to know more information...

 Please leave a message below and click " SEND "

Thanks for your time and attention! Thank you!

Extruded Fin Tube

Extruded Fin Tube,Extruded Fin Pipe,Aluminium Extruded Fin Tube,Copper Extruded Fin Tube

Simcan Industrial Equipment Co.,Ltd. , https://www.simcanindustry.com