In the ring die pellet mill, there are radial slots throughout the die. Powder is fed into the inside of the die and spreaders evenly distribute the powder. Two rollers then compress the powder through the die holes. Two cutters are used to cut the pellets free from the outside of the die. Pellet mills are used to produce animal feed, wood pellets, and fuel pellets for use in a pellet stove. Ring die pellet mills generate less wear and tear during pelleting, and work more energy efficient, which is widely adopted in commercial and large scale production lines.
1. Ring Die Wood Pellet Mill Specification:
(1). This pellet machine mainly used for making wood pellets, the pellets used for industry, boiler factories, the machine can be produce φ6.0, φ8.0, φ10.0, φ12.0 pellets.
(2) The machine adopt imported SKF or NSK bearings, the motor brand is Siemens or China famous Wannan brand
(3) Driven by gear. More strong than by belt, and the capacity 10% higher than by belt.
(4) The machine also matched the safety equipment, once overload, the safety pin will crack, to protecting the machine lifetime.
| Model | Capacity(KG/H) | Power(KW) | Packing Size(mm) | Packing Weight(Kg) |
| XT-480 | 1000-1500 | 55 | 2250*1250*2200 | 4800 |
| XT-560 | 1500-2000 | 90 | 2350*1300*2200 | 6300 |
| XT-760 | 2000-3000 | 160 | 2550*1400*2450 | 11750 |
| XT-850 | 3000-4000 | 220 | 2750*1400*2560 | 14700 |
Before you purchase the Pellet Mill, you have to inform us the basic information as below:
1. What is the type of your raw material? And what is the size?
2. Raw material moisture rate? You can use moisture meter to evaluate it.
3. What is your expectation on the whole line output?
We Promise: All the machine from XT Machinery will enjoy 2 years warranty period.
XT Machinery, Works for You!
Warp Knitting Bracket And Lever
Warp knitting bracket and lever is a device used in the process of warp knitting. It consists of a metal bracket that attaches to the knitting machine and a lever that is used to control the movement of the warp yarns. The bracket holds the warp yarns in place while the lever moves them up and down to create the knitted fabric. The warp knitting bracket and lever are essential components of the Warp Knitting Machine and are used to create a wide range of knitted fabrics, including lace, mesh, and tricot.
Warp Knitting Bracket And Lever,Raschel Machine Lever,Warp Knitting Bracket,Warp Knitting Lever
suzhou cotex international Co.,Ltd , https://www.cotexmill.com