Â
About the product:
• 4 Wheels Drive Powerful System
• 4 Whee Independent Suspension System
• 2*100AH Battery
• Powerful off Road Mold and Smooth on Road Mold
• Automatic Frame up/down System
• Built in LEC Lighting System
• All Aluminium Housing
• 4*powerful 350W motor with Gear Box System
• Classic Instrument Panel
• 4 Wheels Disk Brake System
Specification
Â
| S6011 Predator | |||
| Overall Length | 1.669m | Range up to | 35km |
| Overall Width | 0.85m | Turing Circle | <2.5m |
| Tire | Tire Size Front 19 ″ Tire Size Rear 19 ″ (Tubeless) |
Weight(without battery) | 160kg |
| Maximum Speed | 6km/h | Drive System | 4 Wheels Drive |
| Safe Gradient | 0-15° | Seat Height(from the ground) | 0.75m |
| Maximum Weight Capacity | 150kg | Battery | 24V 100ah lead battery |
| Motor | 24V Â 350W*4 PCS | Charger | 24V 15A |
| Controller | Dynamic/180A | Color | camouflage, sliver |
Details
FAQ
 1. What is your minimum order quantity? Â
   Usually .our MOQ is a container.But if you are our new customer, you could buy some   Â
   samples  for test in LCL.
 2. What is your delivery time?
    It depends on your order quantity ; it usually take 45 work days upon receipt of your 30% deposit by T/T
Â
 3. What is your payment terms?
   T/T, 30% in advance, balance befores shipping.
  4. What is your warranty?
    The warranty of all our scooters is 1 year while the battery is a half year.
 Â
5. What is your port of loading ?
   Shenzhen port .
6. How many pcs can 20'ft container contain?
  About 12 pcs.
                                     Welcome enquiry!
Â
Food Machinery Precision Casting or food machinery investment casting, silica sol process. It is a casting process with little or no cutting.
Cast food machinery is an excellent process technology in the foundry industry. Its application is very extensive. Food machinery cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.
In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.
In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of. This can effectively avoid the air-hole and sand-hole, making the casting look much nicer.
In smelt process, we use middle frequency furnace, avoiding the emergence of the oxide; in molten steel control part, we use Germany-imported direct reading spectrometer machine, assuring its quality before the molten steel out of the furnace. During this process we use ERP production and management software to get the feedback information.
In shell-knock out process, we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.
In shot-blasting process, we have crawler-type and hanging shot-blasting machine, with steel shot 0.5-0.8, making the products smooth.Of course, if the customer wants it look much nicer, we also can carry out sand-blast treatment.
In heat treatment process, we use electric furnace, and adopt double-temperature control in order to heat the products equally. As a result, the products will have great metallurgical structure.
Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.
In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.
Precision Casting Of Food Machinery
Precision Casting Of Food Machinery,Investment Casts for Food Machinery,Food Machinery Investment Casts,Steel Casting for Food Machinery
Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com