Whether the ignition system of a car is healthy or not has a direct impact on whether the car engine can play a role, so to remind netizens and owners of daily maintenance, in addition to focusing on the operation of large automotive parts, but also do not ignore the ignition system of this small part! The following are several ways to detect the failure of the low-voltage circuit of the ignition system. We hope to provide daily maintenance assistance for all our friends.
1. Press the horn and the headlights are on. A screwdriver or wire is used to test the ignition on the “-†terminal of the ignition coil. If there is no fire, the ignition coil is connected to the ammeter to open circuit. If the connection between the terminal and the wire is not strong or the connection is poor, the terminal should be cleaned and the fixing nut tightened. If the wire is broken, replace the wire. The replaced wire should be the same as the original wire.
2. The horn does not sound, and the headlights are off. Test the fire on the starter binding post with a wire. If there is a fire, the fault is a line break between the starter terminal to the ammeter; if there is no fire, the fault is the battery power shortage or its line fault. The battery power is insufficient and should be charged; the line is open circuited and should be reconnected.
3. Test the fire with the screwdriver on the “-†terminal of the ignition coil. If there is a fire, test the fire between the contact arm and the bottom plate of the distributor. If there is a fire, the contact is faulty. Use "Platinum sand bar" to repair the contact and adjust the contact gap to eliminate the fault. If there is no fire, go to the next step.
4. Test the fire at distributor insulation post and distributor shell. If there is no fire, it is the disconnection fault between the distributor insulation post and the ignition coil “-†connection post; if there is a fire, the insulation bracket is up to Broken wire between insulation posts. If the terminal is in poor contact with the wire and the power is off, clean the terminal and the wire head. If the wire is broken, replace the wire with the wire of the same specification.
A food processor is a kitchen appliance used to facilitate repetitive tasks in the preparation of food. Today, the term almost always refers to an electric-motor-driven appliance, although there are some manual devices also referred to as "food processors".
Food processors are similar to blenders in many forms. The primary difference is that food processors use interchangeable blades and disks (attachments) rather than a fixed blade.
Kitchen Food Processor,Electrical Food Processor,Multifunctional Food Processor,Food Processor Mixer
HOMEARTS INDUSTRIAL CO.,LTD , https://www.homeartschina.com