On June 9th, Chinanews.com must have a child safety seat when riding a car. This should be the basic common sense of the car society. However, survey data shows that the current Chinese driver's awareness of the protection of children's ride is weak, the use rate of child safety seats is less than 1%, and some users have problems of incorrect use and low usage rate. Among them, the consumer's lack of safety awareness about children's car ride is the main reason. Secondly, due to the lack of regulations and standards, the quality of safety seats on the market in the Mainland is uneven, which may cause secondary injuries in accidents.
China's child safety seat lacks industry standard usage rate less than 1%
On May 30th, the "China Forced Use of Children's Crew Constraint System Feasibility Study Results Release Conference" hosted by the Road Traffic Safety Research Center of the Ministry of Public Security and the China Automotive Technology and Research Center was held in Beijing. At the meeting, the parties jointly issued the "Blue Book for Children's Safety in China (2014)" and the "Legislative Suggestions on the Enforcement of Child Restriction System", and the representatives of the participating parties jointly called on the society to pay attention to the safety of children riding and promote the mandatory use. Promotion and legislation of child safety seats.
According to experts from relevant conferences, China is currently one of the world's largest production bases for child safety seats. The annual production capacity of safety seats is only 10 million, and more than 90% are exported overseas. Although the current domestic child safety seat usage rate is not To 1%, however, once the child safety seat is mandatory in the country, it is estimated that the domestic market demand will be 12-15 million per year, and with the demand of about 10 million foreign countries, the annual domestic production will reach 20 million.
However, the production supervision of domestic child safety seats is still blank. There are no compulsory industry standards, and there are no relevant supporting laws and regulations. It is basically in disorder, which leads to the uneven quality of child safety seats sold in the market. . In some shopping centers, small commodity wholesale markets, auto parts markets, and online stores, the reporters noticed that the prices of children's safety seats of various functions and different functions vary widely, ranging from two to three hundred yuan to ten thousand yuan.
The Zhongxin.com car channel visited a number of 4S stores and found that the child safety seats sold in the store were basically unattended. In the vehicles that were in the store maintenance, the child safety seat was used in families with children. Also very low. A staff member in charge of after-sales reception at a 4s store said that the car could not be used in a few years, and the customer information of the store showed that the family had nearly 1/3 of the children under 10 years old. .
Zhongxin.com's auto channel reporter also found in the auto parts city that there are very few merchants selling child safety seats. Some merchants said that most of the merchants are reluctant to sell because of the low sales of child safety seats. Sales of decorative items such as foot pads and automotive glass films are very popular. Some insiders pointed out that the current weak consumer awareness in China is the main reason for the difficulty in popularizing child safety seats. The main reason is that there is no concept of safety for children. Most drivers do not have the safety hazard of not using child safety seats. To understanding.
Recently, the Standing Committee of the Shandong Provincial People's Congress revised the "Regulations on Expressway Traffic Safety in Shandong Province" and added new regulations on the speed of passengers under the age of 4 and under the age of 12 years. The new regulations will be officially implemented from August 1, 2014. Under the new regulations, drivers are not allowed to arrange for minors under the age of 12 to ride in the co-pilot position; minors under the age of 4 should be equipped with a child passenger car and should be properly equipped with a child safety seat.
Extensive knowledge: 8 times the death rate without a child safety seat in a car accident Child safety seat is designed for children of different weights (or ages), restraining the child in a safety seat, can effectively improve the child Car safe seat. In the case of a car collision or sudden deceleration, the pressure on the child can be reduced and the child's body movement can be restricted to reduce the damage to them.
According to traffic accident statistics, in the event of a car accident, the infant mortality rate of a child safety seat without a child safety seat is eight times that of a child safety seat, and the injury rate is three times.
Contrary to most people's beliefs, the parents' knees are actually the most dangerous places for children to ride. In a car with a speed of 48 kilometers per hour, a 9 kilogram child will produce about 275 kilograms of impulse in an instant. The most important way to ensure your child's safety is to purchase a qualified child safety seat.
The seat belts on the car are designed according to adult standards and are suitable for adults weighing 36kg and heights above 140cm. If used by your baby, the seat belt may get stuck on your baby's neck and cause more harm to your baby in the event of an accident.
Manual Cleaning Fume Extractor
1. Product description:
Manual cleaning type fume extractor is also called manual cleaning filer unit, manual cleaning welding fume collector. It is usally used for manual welding fume extraction, metal workpiece repairing, movable welding station, etc. It has higher cost-effectiveness comparing with automatic cleaning fume extractors. Portable manual cleaning fume extractors are the most popular solutions for manageable, compact and efficient welding fume extraction. These products are ideal for spot or occasional applications, in various points in the work area and are often used in small-sized businesses.
Moland series manual welding fume extractors are extremely compact product, easy to move, versatile and efficient for occasional applications in different points in the same work area. The 2/3-metre hinged extraction arm allows the unit to easily reach the application care without coming into contact with the operator; the active carbon filter / cartridge filter element guarantees extracted air filtration and deodorising, re-emitting air into circulation through the opening on the product base. Available in different versions according to the work environment electrical standards. Extraction capacity up to 2800 m3/h.
2. Moland Product Series
Moland Portable Fume Extractor series contain of MLWF50, MLWF70, MLWF100, MLWF360, MLWF120, MLWF200, MLWF280-basic, MLWF280S, MLWF290, MLWF300, MLWF300A, MLWF350, MLWF350D, MLWF400, etc.
Except portable fume extractors, we also supply stationary fume extractors (MLWF350-dust bucket type, MLWF500-6T, MLWF500-6T dust bucket type, MLWF500-9T, MLWF800, MLWF800-dust bucket type, MLWF1000, MLWF1500, MLWF2000, MLWF3000, MLWF3500, MLWF4000). The electric control cabinet can be seperated from main equipment for convenient operation when the main equipment is placed outdoors.
Grinding dust extractors are our another dust extraction product series, which contain of downdraft table (MLWF100D, MLWF150D, MLWF200D, MLWF320-DM, MLWF180, MLWF380, MLWF480) and grinding cabinet (MLWF900). The grinding cabinet is usally equipped with telescopic or fixed grinding room, to form a semi-closed space to control dust and smoke spread. It also improves the filtration efficiency with low air volume and energy consumption.
3. R&D
In order to provide advanced products, our R&D department develops 3 to 5 new products every year, and irregularly improves the performance, appearance, and installation methods of existing products.
4. Certification
All our products are approved by CE, ISO9001, ISO14001, utility model patent, design patent, Program copyright, etc.
5. Exhibition
Moland participates at least 5 industry exhibitions each year.
6. Central Fume Extraction System
1) Cantilever type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the Suction Hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
2) Hood suction type fume extraction system
Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the suction hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.
3) Room tupe fume extraction system
Room-type dust removal is suitable for the purification of fumes and smoke generated during the production of automated equipment, such as welding robots, welding machines, grinding, grinding and polishing of metal and plastic parts, drilling, thermal processing, cutting and crushing, stone processing, powder packaging, solid particles and various dusts and fumes produced by mixing and processing.
For working conditions such as robot automatic welding, circular seam and longitudinal seam welding, the smoke and dust purifier is installed with the robot workstation, so that the workstation has its own dust removal function. The fume and smoke are effectively collected through equipment components such as pipes and dust hoods. The room-type design prevents the volatilization and diffusion of smoke to keep the air in the workshop clean.
The working conditions with moderate welding workpieces and large amounts of dust and smoke are suitable for room-type treatment solutions. The room type centralized dust dedusting solution is divided into side suction and top suction method dust collecting ways. The appropriate solution can be designed according to the site conditions and treatment goals.
4) Blow suction type fume extraction system
Blow-suction type dust removal solution is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.
7. Company information
Jinan Moland Environmental Tech Co., Ltd., is located in No. 11889 Jingshi West Road, Changqing District, Jinan City, Shandong, China, established in 2016. It`s an environmental protection technology enterprise specializing in research, development, manufacture and sale of efficient smoke purification systems.
The company is committed to reducing the environmental impact of production process, protecting workers from harmful gases and dust, and creating a cleaner working environment. At present, the company′s products have been successfully applied in automobile, railway, construction machinery, marine engineering, aviation and other mechanical processing industries, as well as new materials, grain, wood, recycled resources processing and other industries. The company has passed the ISO 9001 quality management system certification, obtained the certification of China Environmental Protection Products issued by China Environmental Protection Industry Association, and CE certification of EU. It also has a number of invention patents, utility model patents and appearance patents. Through continuous R&D and innovation, many products of the company have reached the international leading level.
Moland′s environmental services cover the whole process from project design, product manufacturing to installation, commissioning and after-sales service. We will provide you with the most professional governance program and the best quality service.
Manual Cleaning Filter Unit,Air Purification Equipment,Plasma Air Purifier,Air Filter System
Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com