1 The “Safety Practices for Milling Machines†must be observed.
2 Check whether the transmission part of the machine tool is reliable before work, whether the machine tool travel baffle is installed, meet the work requirements, and then drive.
3 The workpiece and the tool should be installed firmly. The tools used for loading the workpiece should be safe and reliable. It is not allowed to use the general wrench and casing to load and unload the workpiece.
4 When the machine is working, it is not allowed to lie on the bed, or to stand or sit on the workbench.
5 When using the lifting equipment or lanyard to load and unload the workpiece, you must abide by the “Safety Technical Operation Regulations for Lifting Equipment†and the “Safety Technical Operation Regulations for Hanging Workersâ€.
6 There must be a protective baffle in the work area to prevent flying debris from injuring people. The site must have appropriate safety space, and the workpieces should be placed in accordance with the fixed management regulations.
7 Milling various workpieces, especially during roughing, begins with slow cutting.
8 During cutting, it is not allowed to shift and adjust the tool. It is forbidden to touch or measure the workpiece by hand. The human body, head and hands are not allowed to approach the tool.
(Finish)Copper Bar Bending Machine,High-Speed Copper Bar Bending Machine,Copper Metal Bar Bending Machine,Fast Copper Bar Bending Machine
JINAN SUCCESS CNC MACHINE , https://www.roll-bending.com