This report comes from Jeff Rudolph:
Newport FPD - 02/18/21A fully involved attached garage at 13,000 block of Wadsworth Road. The command post was initially set up at the working fire and later upgraded to a box. One dog was successfully rescued, and no injuries were reported.
Jeff Rudolph photo
The fire was intense, and the attached garage was completely destroyed. Firefighters worked quickly to contain the flames and ensure the safety of nearby homes. A local resident managed to save one pet, which is a small but important victory in such situations. The cause of the fire is still under investigation, and officials are urging residents to be cautious with fire sources during this time of year. If you have any information about what may have started the fire, please contact the local fire department.
Besides AR Plate or Q&T Steel, HP Wear Resistant Group offers various products of wear plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates, Casting Plates, Tungsten Carbide Coated Plates in various grade and multiple size options.
An abrasion resistant, quenched and tempered, high strength, fine grained steel Wear Plate and Abrasion Resistant Wear Plate offers lower cost wear protection. With a hardness of 250 to 320 BHN, it will outlast hot rolled carbon plate but can still be drilled, punched, or machined for liners and wear plates. Strength characteristics of this plate make it an excellent choice for structural use.
Provides superior hardness to toughness ratio. AR Steel Plate is liquid-quenched and tempered and through-hardened. The result is a plate with excellent abrasion resistance and high impact resistance. The outstanding wear characteristics can be attributed to the balanced chemistry and very fine distribution of Chromium, Boron, Titanium and Molybdenum. The resulting carbides reinforce the plate structure and provide uniform through-hardness.
Provides maximum wear resistance from impact and sliding. The fine grained, thru-hardened alloy steel chemistry makes this plate have the optimum hardness/toughness ratio.
The Chemicals of AR Steel Plate
|
Chemistry |
% |
|
C |
.25/.31 |
|
Mn (Max) |
0.95 |
|
P (Max) |
0.025 |
|
S (Max) |
0.005 |
|
Si |
.45/.55 |
|
Ni (Max) |
1.00 |
|
Mo (Max) |
0.65 |
|
Cr (Max) |
0.75 |
|
B |
.0005/.005 |
The Chemicals of AR Steel Plate
|
Bark Hammers |
Bins & Hoppers |
Blast Furnace Handling Equipment |
|
Blades |
Blow Tank Plates |
Buckets & Components |
|
Bucket Lips |
Chip Silo Components |
Chipper Hoods & Components |
|
Chutes |
Conveyors & Liners |
Crusher Components |
|
Cyclones |
Dozer Blade Liners |
Debarking Drum Components |
|
Downcomer Spout Liners |
Drag Conveyors |
Drums & Sprockets |
|
Dust Collector Systems |
Flights |
Fan Blades & Housings |
|
Flatback Elbows |
Flume Liners |
Hammers |
|
Hell Pads |
Hammer Mill Side Liners |
Haul Truck Bed Liners |
|
Hooks |
Impact Plates |
Liner Plates |
|
Log Decks |
Mine Cars & Equipment |
Hot & Cold Strip Mill Guides |
|
Pyrite Liners |
Sand Systems |
Scraper Blades |
|
Screens |
Screw Conveyors |
Scrap Handling Equipment |
|
Shakeout Machines |
Shot Blast Equipment |
Skip Cars |
|
Skirtboard Liners |
Sprockets |
Transitions |
|
Washers |
Wear Plates |
Abrasion Resistant Steel Plate,High End Abrasion Resistant Steel Plates,CDP Steel Liner Plate,Wear Plate For Chute Liners
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com