Power: 5.5kw / 7HP
Rotating Speed: 600r/min
Rotating Φ Dia: 180mm
Spindle Φ Dia: 46mm
Moving blades: 9PCS
Fixed blades: 2PCS
Crushing ability: 150-200kg/h
Feeding inlet: 350x220mm
Screen net Φ : 8mm
Net Weight(without motor): 280kgs
Package size(LxWxH): 1.07x0.84x1.31 m
Features:
1) Strong structure, easy to operate, low electricity consumption & durable
2) Uses high quality steel material especially for making knives of the crushers, the machine stands long use under severe and continuous service conditions.
3) The blades can be grinded for many times and can be used repeatedly
4) Blades base is made of T10 high quality steel, hard to be broken and damaged; Blades base structure is stable and durable
5) With flat type, claw type and cross type blade and screen with different hole size for chose to suit various demand.
6) With double reduce noise layer design to reduce noise output.
7) Has protection system with the power supply to ensure the equipment safe
8) Easy to clean and maintain, the hopper, crusher room, blades and screen can be removed and mounted easily.
9) Necessary for the plastic extrusion machines and other plastic recycling industry.
| Plastic Crusher (JHL series) | |||||
| Model | JHL-230 | JHL-350 | JHL-400 | JHL-500 | |
| Power | Kw | 4 | 5.5 | 7.5 | 11 |
| Hp | 5 | 7 | 10 | 15 | |
| Rotating Speed (r/min) |
600 | 600 | 500 | 500 | |
| Rotating Φ Dia (mm) |
180 | 230 | 230 | 230 | |
| Spindle Φ Dia (mm) |
46 | 46 | 62 | 62 | |
| Moving blades  (pcs) |
6 | 9 | 12 | 15 | |
| Fixed blades (pcs) |
2 | 2 | 4 | 4 | |
| Crushing ability (kg/h) | 110-150 | 150-200 | 250-400 | 300-500 | |
| Feeding inlet (mm) |
230x200 | 350x220 | 400x250 | 500x280 | |
| Screen net Φ (mm) | 8 | 8 | 10 | 10 | |
| Net Weight - kg (without motor) |
220 | 280 | 450 | 560 | |
| Package size ( LxWxH m) |
0.99x0.69x1.16 | 1.07x0.84x1.31 | 1.19x0.96x1.40 | 1.22x1.00x1.52 | |
| JHL series crusher: stepped claw blade (multi-cutter): especially efficient for plastics in lump or blocky, which are in hard materials. | |||||
This series of equipment can regenerate various types of activated carbon such as coal, wood, nut shell, mineral (petroleum), or powder, granule, column, or primary, extruded, and re-formed activated carbon, according to the characteristics of activated carbon fire method regeneration treatment , This series of equipment is equipped with unique flue gas treatment equipment to ensure the green and environmental protection of the activated carbon fire method regeneration process.
The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Carbon Regeneration Kiln,Rotary Kiln Services,Carbon Regeneration Process,Chemical Regeneration Of Activated Carbon
Changchun Gold Research Institute Co.LTD , https://www.ccgrizbs.com