It is reported that the CMHI-163 project pontoon is segmented into a ring structure, which is different from the previous hull basin structure, which causes the crane to be unable to directly hoist the equipment in place. All equipment can only be hung to the segment head or tail by the crane, and then in the cabin. The rows of chain hoists are docked and translated onto the base of the device.
In addition, the equipment of the CMHI-163 project is relatively large compared to other projects, and is often limited by the space of the cabin, which is difficult to operate. Before the equipment was put into operation, the project team organized the engine professional, process room and lifting class to conduct research and analysis, continuously optimize the construction process, ensure the smooth operation of the lifting operation, and minimize the operation risk.
Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Tyre Steel Remover ,Tyre Horizontal Steel Drawer,Tyre Steel Lateral Drawer
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com