Here is a revised and improved version of the provided content in English, written in a natural, human-like tone with added details to ensure it exceeds 500 characters:
---
A magnetic separator is a device that uses powerful magnets to remove ferrous materials from a mixture. It typically consists of a rotating drum that generates a strong magnetic field. As materials pass through, non-magnetic particles fall out through a mesh at the base, while magnetic particles are attracted to the sides of the container. These separators are widely used in industries such as mining, recycling, and food processing for material purification.
They can be used in continuous production lines or for batch processing. One of the most common applications is removing unwanted metal debris like nails, staples, or other metallic contaminants from a product stream. This helps maintain product quality and safety. Magnetic separators vary in size, from small lab units to large industrial models used in scrap metal recycling centers.
Complete Set of AUTO-Discharging Magnetic Separator Set
This series works in combination with a metal detector. The separator only activates once the metal detector sends a signal, which helps save energy. Designed for short-term operation, these separators have strong magnetic fields and are more effective at removing iron compared to continuous-duty models, making them ideal for high-demand environments where iron content is not too high.
Specifications:
1. Optimized design using computer modeling ensures a stable structure and low energy consumption.
2. The magnetic field distribution is scientifically designed, offering deep penetration and strong attraction force.
3. The excitation coils are treated with special techniques to improve performance, reduce temperature rise, and enhance insulation and heat resistance.
4. Easy installation, simple maintenance, and long service life.
5. All technical data meet the standard JB/T 7689-2004.
PART II: MODEL SELECTION
PART III: Technical Information
Rated voltage DC-220V, duty cycle TD-60%, steel temperature: below 150 degree
PART IV: INSTALLATION INSTRUCTIONS
As shown in the image above, the separator can be installed either on the head or middle section of a conveyor belt. Regardless of the installation point, make sure:
PART V: OPERATION
PART VI: PACKAGING
Plywooden Box with Iron Frame Inside
PART VII: OUR SERVICE
Quick Response:
We respond to all inquiries via email, fax, or instant message within 24 hours. Feel free to call us anytime for assistance or documentation.
Pre-Sales Service:
Our senior engineers will provide tailored technical proposals based on your needs. You’ll receive photos and videos of the entire production process.
Packaging & Transportation:
Packaged in a wooden box with an internal iron frame. We offer multiple shipping options including courier, air, and sea freight. You can choose your preferred shipping company or we can handle it for you. Full tracking is provided until delivery.
After-Sales Service:
Technical support and maintenance are available during the warranty period. On-site services can also be arranged.
NEVER HESITATE TO CONTACT US:
Yueyang Zhong Nan Electromanet Technological Co., Ltd
www.zn-magnet.com
--- Let me know if you'd like this adapted for a specific audience or platform!
- Model NO.: RCDD
- Voltage: 220V
- Material: Casting Steel
- Certification: ISO9001:2008, ISO9001:2000
- Warranty: 2 Years
- Customized: Customized
- Mining Object: Coal Machinery
- Installation: Hanging or Frame Fixing
- Rated Voltage: DC-220V/110V
- Material Discharging: Auto Discharging
- Transport Package: Plywooden Box with Iron Frame Inside
- Origin: China
- Type: Magnetic Separator
- Weight: 2T
- Material Feature: Oil Resistant
- Energy Saving: Energy Saving
- Color: Red
- Condition: New
- Insulation Degree: H
- Usage: Ferrous Material Removing
- Wire Winding Material: Aluminum or Copper
- Trademark: ZN-Magnet
- Specification: Magnetic Separator
- HS Code: 8474100000
A magnetic separator is a device that uses powerful magnets to remove ferrous materials from a mixture. It typically consists of a rotating drum that generates a strong magnetic field. As materials pass through, non-magnetic particles fall out through a mesh at the base, while magnetic particles are attracted to the sides of the container. These separators are widely used in industries such as mining, recycling, and food processing for material purification.
They can be used in continuous production lines or for batch processing. One of the most common applications is removing unwanted metal debris like nails, staples, or other metallic contaminants from a product stream. This helps maintain product quality and safety. Magnetic separators vary in size, from small lab units to large industrial models used in scrap metal recycling centers.
Complete Set of AUTO-Discharging Magnetic Separator Set
This series works in combination with a metal detector. The separator only activates once the metal detector sends a signal, which helps save energy. Designed for short-term operation, these separators have strong magnetic fields and are more effective at removing iron compared to continuous-duty models, making them ideal for high-demand environments where iron content is not too high.
Specifications:
1. Optimized design using computer modeling ensures a stable structure and low energy consumption.
2. The magnetic field distribution is scientifically designed, offering deep penetration and strong attraction force.
3. The excitation coils are treated with special techniques to improve performance, reduce temperature rise, and enhance insulation and heat resistance.
4. Easy installation, simple maintenance, and long service life.
5. All technical data meet the standard JB/T 7689-2004.
PART II: MODEL SELECTION
PART III: Technical Information
Rated voltage DC-220V, duty cycle TD-60%, steel temperature: below 150 degree
| Model | Applicable Belt Width (mm) | Hanging Height (mm) | Magnetic Induction (≥ mT) | Material Thickness (≤ mm) | Applicable Belt Speed (≤ m/s) | Excitation Power (kW) | Driving Power (kW) | Overall Dimension (mm) | Hanging Size (mm) | Mass (kg) | |||
| A | B | H | C | D | |||||||||
PART IV: INSTALLATION INSTRUCTIONS
As shown in the image above, the separator can be installed either on the head or middle section of a conveyor belt. Regardless of the installation point, make sure:
- The separator is positioned correctly on top of the conveyor.
- It is aligned vertically with the conveyor belt.
- There is a lifting point available at the top of the conveyor. We can provide an adjustable lifting chain or you can use a frame to secure the separator above the conveyor.
- This model features automatic discharging, meaning it removes ferrous contaminants without manual intervention.
- You may want to check if a non-magnetic roll is required depending on your application.
PART V: OPERATION
PART VI: PACKAGING
Plywooden Box with Iron Frame Inside
PART VII: OUR SERVICE
Quick Response:
We respond to all inquiries via email, fax, or instant message within 24 hours. Feel free to call us anytime for assistance or documentation.
Pre-Sales Service:
Our senior engineers will provide tailored technical proposals based on your needs. You’ll receive photos and videos of the entire production process.
Packaging & Transportation:
Packaged in a wooden box with an internal iron frame. We offer multiple shipping options including courier, air, and sea freight. You can choose your preferred shipping company or we can handle it for you. Full tracking is provided until delivery.
After-Sales Service:
Technical support and maintenance are available during the warranty period. On-site services can also be arranged.
NEVER HESITATE TO CONTACT US:
Yueyang Zhong Nan Electromanet Technological Co., Ltd
www.zn-magnet.com
--- Let me know if you'd like this adapted for a specific audience or platform!
Squaric Acid Syntheses Material Intermediate
CAS No. 5231-87-8,Molecular formula: C8H10O4,CAS NO: 29636-87-1,Molecular formula: C5H8N2O
Chemtarget Technologies Co., Ltd. , https://www.dgtbcb.com