On the 26th, the Qingdao Municipal Environmental Protection Bureau officially promulgated the Notice on Issues Concerning the Issuance of Environmentally Qualified Inspection Qualification Marks for Non-operating Cars in Six Years, and the Non-operating Cars and Other Vehicles Exempted from Environmental Protection within Six Years Registered in the City Testing, directly issuing environmental protection signs. The “Qingdao Ji†new car will receive the environmental protection mark directly at the vehicle listing place, and it can be collected free of charge at any motor vehicle exhaust detection station in the city. The implementation of the notice is implemented, which means that the motor vehicle exhaust detection and safety technology inspection in Qingdao is synchronized, and the six-year exemption policy is implemented.
Exemption scope: "Old car" also enjoys the New Deal According to the notice, the vehicle that enjoys the exemption policy must be a non-operating car registered in Qingdao and within six years. Exempted models include non-operating cars and other small and micro passenger cars (except vans, 7-seat and 7-seat vehicles). The specific models are subject to the provisions of the Motor Vehicle Type Terms and Definitions.
In the registration time, the newly registered car after September 1, 2014 will be exempted from environmental protection online testing within six years, and the “green label†can be issued directly. The environmental protection department also pointed out that the exemption policy is not only the privilege of the “new carâ€. The “old car†with the registration date on September 1, 2012 (inclusive) can enjoy 2 exemptions; the registration date is September 1, 2010. From the date of August 31, 2012, you can enjoy 1 exemption. Those registered before August 31, 2010 (inclusive) do not enjoy exemption from inspection.
Procedures: How to get the environmental protection mark after receiving the exemption from inspection with free materials? The notice clearly stipulates that for newly registered vehicles, the environmental protection signs will be issued directly in accordance with the validity period determined in the “Regulations on the Qualification Marks for Motor Vehicle Environmental Protection Inspection†issued by the Ministry of Environmental Protection. The owners can directly receive the new vehicles when they are listed.
"My car is registered in 2012, there are also environmental protection signs, how to get it?" In this case, the Municipal Environmental Protection Bureau said that the vehicle has obtained the environmental protection mark and is in the scope of exemption from inspection. The owner can expire at the expiration of the environmental protection mark. Vehicle driving license, vehicle registration certificate (original and photocopy) and a copy of the environmental protection mark applied for last time are collected.
Regarding the location where the environmental protection mark is exempted, the Municipal Environmental Protection Bureau stresses that if the vehicle does not cause a traffic accident causing casualties during the exemption period, the owner shall sign the confirmation on the back of the copy of the Motor Vehicle Driving License. In the future, all motor vehicle exhaust gas detection stations in Qingdao will set up an inspection-free vehicle environmental protection mark issuing point. Moreover, there is no charge for the issuance of environmental labeling.
Interpretation: "Exemption from inspection" means that the staff of the Environmental Protection Bureau of the On-line Municipality will not remind the public when they interpret the notice on the 26th. "Exemption from inspection within six years" does not mean that a vehicle inspection is required every six years. "Motorcycle's security inspections and 'circle inspections', the new car is in every two years in six years. Even if the conditions of 'exemption from inspection' are met, the owner still needs to receive the environmental protection mark every two years and paste it according to the regulations. It is necessary to go online to detect the exhaust gas." The relevant person in charge of the Motor Vehicle Division of the Qingdao Environmental Monitoring Detachment said.
Qingdao's exemption policy is only for cars registered in this city. The relevant person in charge said that in order to better provide convenience services, Qingdao took the lead in launching a six-year exemption policy. However, the Ministry of Environmental Protection has not yet issued official documents and cannot know the implementation of other regions. Therefore, the current policy is only for “Qingdao†cars.
Reminder: In four cases, the “contribution†of motor vehicle exhaust gas to air pollution is becoming more and more serious. The air pollution in Qingdao is mainly changed from the past soot pollution to the current composite type of soot, dust and motor vehicle exhaust. Pollution. Unlike industrial high emissions, motor vehicle exhaust emissions are concentrated emissions from land-discharge and heavy traffic sections. The pollutants discharged mainly stay at the height of the breathing zone, so the hazard to the human body is higher than other sources.
At the same time as the notice was announced, the Municipal Environmental Protection Bureau issued an initiative to hope that citizens (units) with motor vehicles consciously abide by the relevant requirements for regular monitoring of motor vehicle exhaust, conduct regular environmental protection inspections of motor vehicles, and do not use vehicle fuels that do not meet the prescribed standards. And detergent, do a good job in vehicle maintenance, ensure that the vehicle exhausts up to standard, and jointly make a contribution to improve the quality of the atmospheric environment and breathe fresh air.
The staff of the Environmental Protection Agency reminded the owners to get the signs in time to avoid delays and penalties. When the owner of the new car or the original environmental protection mark expires, the owner of the vehicle should receive the environmental protection mark in time. With the introduction of the intelligent transportation of the island city, the law enforcement means are constantly improving, and vehicles that have no standard and expired signs will be investigated and dealt with by the public security traffic management department.
The notice stipulated four conditions that did not meet the conditions for exemption from inspection. First, traffic accidents causing casualties or exhaust gas detection exceeded the standard, and black smoke was not rectified during the exemption period. Second, more than 4 from the date of leaving the vehicle. The registration procedure was not completed in the year; the third is that the registration date of the vehicle is before August 31, 2010; the fourth is that the environmental protection mark is valid until September 1, 2014, and no environmental inspection has been carried out.
Advanced Plastics (160-220℃)
Advanced Plastic is a polymer material which has a higher comprehensive performance and can be use in long-term temperature above 150 ℃.It is mainly used in the field of high technology .So we also call it as the high performance engineering plastics or heat resistant engineering plastics.
This kind of material has excellent characteristics of light weight, high strength , good heat resistance and others and its application is from the original national defense and aerospace to the field of car, equipment, high-end consumer goods and many civilian areas.
There are many kinds of Advanced Plastic produced by Dongguan Noegem Plastic Product Co.,Ltd .
1. Production:
Polyphenylene sulfide plastic sheet (PPS plastic sheet),
PPS plastic which also called Polyphenylene sulfide.On the primary key is extremely dense and sulfur atoms of benzene ring, thermoplastic resin is high rigidity, high crystallinity, have higher strength and modulus, products can be used in the 200 ~ 224 ℃, 250 ℃ under the main performance.
2. Production:
Polyether imide plastic sheet (PEI plastic sheet),
Antistatic polyether imide plastic sheet (ESD PEI plastic sheet),
Conductive polyether imide plastic sheet (CON PEI plastic sheet),
Polyether imide plastic rod (PEI plastic rod),
Antistatic polyether imide plastic rod(ESD PEI plastic rod),
Conductive polyether imide plastic rod (CON PEI plastic rod),
PEI plastic is characterized by high intensity, high rigidity, abrasion resistance and dimension stability.PEI plastic is a transparent solid of amber, which has inherent flame retardancy and low smoke intensity without adding any additives. The oxygen index is 47% and the combustion level is ul94-v-0.
PEI plastic is 1.28 ~ 1.42 g/cm3 density, glass transition temperature is 215 ℃, thermal deformation temperature of 198 ~ 208 ℃, can use for a long time under 160 ~ 180 ℃, allows intermittent maximum temperature of 200 ℃
PEI plastic has excellent mechanical strength, electric insulation, radiation resistance, high and low temperature resistance and fatigue resistance and molding processability;The addition of Glass Fiber, carbon fiber or other filler can enhance the modification purpose.
3. Production:
Polyether ether ketone plastic sheet (PEEK plastic sheet),
Antistatic polyether ether ketone plastic sheet (ESD PEEK plastic sheet),
Conductive polyether ether ketone plastic sheet (CON PEEK plastic sheet),
Polyether ether ketone plastic rod(PEEK plastic rod),
Antistatic polyether ether ketone plastic rod(ESD PEEK plastic rod),
Conductive polyether ether ketone plastic rod (CON PEEK plastic rod),
Polyetheretherketone (PEEK) plastic is a kind of excellent performance of special engineering plastics, has more significant advantages compared with other special engineering plastics..Can be used for high-end technology such as mechanical, nuclear engineering and aviation.
Advantage :
1)Excellent chemical resistance and hydrolysis resistance
2)Excellent physical and mechanical properties
3)Resistance to high temperature is 260 degrees,
4) light and good dimensional stability
5 )excellent flame retardancy
6)Good electrical insulation and electrical stability
7 )it can be mixed, easy to process composite
8)Good self-lubrication
4. Production:
polyphenyl ether plastic sheet(PPO plastic sheet ).
PPO plastic is a special kind of engineering plastic, which has many features that other engineering plastics do not have:
1. Transparency: PPO plastic is one of the few transparent plastics;
2. Non-toxic: PPO plastic itself is less toxic and more suitable for food and medical applications;
3. Low temperature resistance: the low temperature of the PPO in the low temperature of minus 170 degrees centigrade, which is a lot of engineering plastic;
4. Low gravity: 1.08 g/cubic cm is slightly more dense than water;
Main features of Advanced Plastic
Heat temperature of 150 ~ 300 ℃
Advantages :
1).Good in heat resistance,
2).Good chemical resistance and radiation performance,
3).Good flame retardancy
4).Good stiffness, strength, toughness, creep, abrasion and other comprehensive mechanical properties.
Application: space aviation, defense military industry, nuclear power, electronics, transportation, machinery manufacturing, medical devices and other civil fields.
Advanced Plastic,Advanced Technology Plastic,Excellent Quality Advanced Plastic
Dongguan Noegem Plastic Products Co.,Ltd , https://www.noegempLastic.com