Vortex flowmeter is mainly used for the flow measurement of medium fluids in industrial pipelines, such as gases, liquids, vapors and other media. It is characterized by low pressure loss, large measuring range, high accuracy, and almost no influence of parameters such as fluid density, pressure, temperature, and viscosity when measuring volume flow. No moving mechanical parts, so high reliability and low maintenance. So when choosing vortex flowmeters, should we pay attention to those aspects?
1. The flowmeter should be used within the technical parameters of the working pressure and temperature range of the medium. Do not deliberately select high-pressure and ultra-high temperature instruments. The instrument should be selected according to the actual working pressure and temperature. The price of the latter should be higher.
2. Flowmeter selection Do not use the flow as much as possible to work at the lower limit, so the flowmeter should be as small as possible to obtain a larger flow rate and flow range.
3. The lower flow rate of the vortex flowmeter depends on the working condition density and kinematic viscosity of the medium. The upper limit flow rate is generally not affected by the medium pressure and temperature. Therefore, the flow rate range can be determined by determining the actual lower limit flow rate. After calculating the lower limit flow, check the flow range table to determine the corresponding caliber.
4. Explosion-proof flowmeters should be used in explosion hazardous locations.
Where does a professional vortex flowmeter come from? Well-known domestic flow meter manufacturers Changzhou Cheng Feng instrument, more than 30 years of faithful supply of various flow meters, complete specifications, reliable quality.
Buy the flowmeter to Changzhou Chengfeng Instrument.
28-33 ton forklifts, all the main key parts are supported by internationally renowned manufacturers. Excellent performance, reliable and durable. High security, product appearance calm atmosphere, simple and neat.Widely used for ports, railways, steel and other heavy working conditions industries.
1.Adopted European technology, forklift reaches EN1459; iso15018 standard, high quality and safety.
2.VOLVO TAD750VE engine, Emissions comply with EPA 3 and EU III requirements: High performance, low fuel consumption, low speed with high torque, and large reserve power.
3.Germany ZF three-stage power shift gearbox. Using the most advanced TCU microelectronics control gearbox proportional operating valve,to achieve smooth and automatic flat shift. Fault display and convenient diagnostic device socket. Simple maintenance and repair.
4.The electrical system implement the latest international, national and industry standards. It use seat-aware system, which improve the operation norms and safety. Advanced CAN bus communication system. High reliability, good anti-interference; Through the CAN controller to make collection of the engine, gearbox, vehicle all kinds of sensors, pressure switches, fault and other information,and show on the LCD screen. So that the operator can more visually view the various parameters of the forklift,and also other fault display.
General |
|
|
|
|
|
|
Model |
|
FD250 |
FD280 |
FD330 |
||
Power Type |
|
Diesel |
Diesel |
Diesel |
||
Load Capacity |
kg |
25000 |
28000 |
30000 |
||
Load centre |
mm |
1200 |
1200 |
1200 |
||
Tyre |
|
|
|
|
|
|
Tyre |
|
|
Pneumatic Tyre |
Pneumatic Tyre |
Pneumatic Tyre |
|
Front Tyre |
|
14.00-24-32PR |
14.00-24-32PR |
14.00-24 |
||
Rear Tyre |
|
14.00-24-32PR |
14.00-24-32PR |
14.00-24 |
||
Overall Dimension |
|
|
|
|
|
|
Lift Height |
mm |
4000 |
4000 |
4000 |
||
Fork Size |
L×W×T |
mm |
2440×250×110 |
2440×250×110 |
2440×250×110 |
|
Mast Tilt Angle |
F/R |
. |
5/10 |
5/10 |
5/10 |
|
Mast Lowered Height |
mm |
3890 |
3890 |
3890 |
||
Mast Extended Height(with backrest) |
mm |
6020 |
6020 |
6020 |
||
Length to face of fork(Without fork) |
mm |
6660 |
6660 |
6660 |
||
Overall Width |
mm |
3040 |
3040 |
3040 |
||
Overhead Guard Height |
mm |
3330 |
3330 |
3330 |
Application Area:
1.Warehouse
2.Port
3.Factory
4.Distribution Center
5.Logistics
If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.
25.0-33.0Ton Diesel Forklift,33.0Ton Diesel Forklift,Big Diesel Forklift
ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , http://www.goodsenseforklift.com