Wooden door decorative design color profile selection suggestions:
1, matt easy to match, if the light is not good land;
2, wild white, if you can not choose, choose white;
3, the door panel shape should not be complex, simple but look good.
â–² The wooden color is also relatively easy to match, such as with wooden furniture â–² but the color of wood can be decorated very naturally, or it may become very soil. This problem was discussed before. On the one hand, I think it is the reason of texture and texture. On the other hand is the saturation of the yellow color reasons â–² other color decorative design of the wooden door is relatively rare, this kind of pale green very fresh â–² white wild, but the white is also divided into a variety of different white, white, ivory, white Etc. If you want to match white in the room, make sure that the white color is consistent beforehand. Take a sample of the previous material for the color of the material behind. â–² The white paint may be yellow if it is of poor quality. , If it is paint as much as possible choose UV paint, Dachang's product technology is relatively more reliable. â–² In addition to white, the common is the wood color, wood color is a large category, according to different wood or veneer, different lines , there will be different textures â–² more colorful colors are relatively easy to grasp, without the guidance of the designer is not recommended to choose â–² gray also It is a wild color and is very suitable for the now popular "Sexual Nordic style"
â–² Although black is not a color, it can be used in the same way as white, but the large black area in the interior design will make the indoor environment appear dark â–² A touch of blue is also good, light colors are relatively easy to match
Xiao Bian suggested that the door cover should generally be the same color as the door leaf. The visual effect is better unified. Of course, if the different colors are matched properly, unexpected and good results can be achieved.
Well, today's little share is here, we will see you tomorrow! The text was originally created by Dongguan Red Decoration Design Co., Ltd. and the copyright belongs to the author. Reprint please specify, thank you!
Rainbow High Speed Injection Molding Machine have "5H" characteristcs. "5H" means High Speed, High Energy-saving, High Precision, High Efficiency and High Safety.
1. High Speed--High precision single cylinder injection system, suitable to high speed injection, low inertia, fast response to speed up and down; maximum injection speed 300~450mm/sec; 30ms response time of speed up and down.
2. High Energy-saving--Equipped with high performance servo system to save power 30%~80% than normal injection molding machine.
3. High Precision--Adopts European high grade KEBA controller to control a high precision injection positin and temperature; equipped with high precision MOOG servo valve full close loop injection system;l double cylinder for injection carriage for balance;
4. High Effciency--The newest optimized design for clamping unit, the clamping motion is fast and stable; plasticization and ejection at the same time, to save molding cycle time; big L/D ratio screw to plasticize material in the shot time;
5. High Safety--Electrical, mechanical and hydraulic protection device; indipendent safety module to control clamping, injection, feeding and carriage moving; hidden type safety device to inprove security; totally enclosed type sheet metal.
High-speed Injection Molding Machine
High Speed Injection Molding Machine,High Speed Plastic Injection Machine,Electric Injection Molding Machine
Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com