Cangzhou three-way manufacturers low-cost wholesale non-standard DN300 carbon steel equal tee

Cangzhou three-way manufacturers low-cost wholesale non-standard DN300 carbon steel equal tee

Non-standard carbon steel equal-diameter tees are also one of the more common types of pipe fittings. A section of main pipe plus a small branch pipe is named after the use of heating to press the tee and reduce the tonnage of the equipment required for material forming. Precision seamless pipe for high dimensional accuracy and surface finish of mechanical structures and hydraulic equipment.

Non-standard carbon steel equal-diameter tee features:

1. Large pressure bearing: The outer wall of the product adopts seamless steel pipe, which is the key technology for large pressure bearing. The lining high chromium nickel alloy resists abrasive wear and does not withstand high pressure. It is more guaranteed than rare earth wear-resistant steel pipe and steel-ceramic composite pipe. Safe operation, so the product is suitable for high pressure, high concentration, long distance conveying pipeline.

2, good wear resistance: the use of special composite modifier to refine the grain, greatly improving the product's toughness and tensile strength. The elbow is made of eccentricity to improve its wear resistance. The wear value test results are generally in the range of 0.03 to 0.20 cm3/1.61 km, which is about 3 to 5 times that of plastic, and the wear resistance is 4-6 times higher than that of the steel pipe.

3, easy to install: the outer wall adopts seamless steel pipe series specifications, which greatly facilitates the design and installation of pipe fittings, and has good welding performance, welding and flange connection.

4, high temperature resistance: lining high chromium nickel alloy can be applied at 600 ° C without deformation, non-oxidation, and maintain high wear resistance.