Shenghong Group has announced that the company's second phase of 400,000 tons of melt straight spinning microfiber production project has been successfully put into production. So far, this private enterprise, located in Shengze Town, Suzhou City, China's silk capital, has become a veritable “global microfiber expertâ€.
"The production of Shenghong Chemical Fiber Co., Ltd. will reach 300,000 tons this year after it is put into operation. This exceeds the total output of Europe, the United States, Japan and South Korea and other countries and regions. The production capacity ranks among the top in the world." With the launch of the Microfiber Phase II project, the director of Shenghong Group The dream of the Chairman of the Board, Rui Hangen, to create a global microfibre base has become a reality.
Microfiber generally refers to a product with a single-filament fineness of less than 0.5 DPF. It is called a new-generation synthetic fiber and represents a new synthetic fiber that is developed in the direction of high-tech and high-fidelity chemical fiber. It is mainly used in high-end fashion fabrics. , high-density fabrics, high-performance fabrics, imitation peach skin fabrics, artificial suede, advanced audition paper, gas filtration.
In recent years, relevant state departments and trade associations have been calling on domestic chemical fiber manufacturers that have the ability and strength to accelerate the pace of development of polyester ultra-fine denier filaments, and to produce high-quality polyester superfine denier filament products as soon as possible to meet downstream users. The demand for medium-to-high-grade fabrics has brought the domestic textile industry to a new level, and has subsequently shaken off various thresholds encountered when China's "cheap textiles" were exported.
The National Textile and Development Commission recently issued a report on the trend and forecast of the textile industry, which shows that China’s textile industry’s exports are facing unfavorable factors such as the appreciation of the renminbi. In 2007, the export growth rate will be lower than the level in 2006, and the annual export value is expected to be US$165 billion, an increase from the same period of last year. 16%.
The report pointed out that in 2007 China's textile industry faced four major unfavorable factors, among which the special point was that the textile industry will still face the shortage of domestic cotton and the long-term dependency of imports of chemical fiber materials.
The viewpoint in the report was confirmed in Shengze Town, China's silk capital. This is the important town of China's textile industry. Historically, it has been known as “the sunrise is ten thousand and the clothing is being taken care of.†There are more than 5,000 textile companies and more than 100,000 looms in the local area. More than 40 billion yuan worth of fabrics are traded here each year. However, one problem that cannot be ignored is that most of the polyester filaments used in local fabrics have been supplied by foreign sources in the past few years. In particular, ultra-fine denier filaments have always been imported, resulting in increased costs and reduced competitiveness.
In order to break this bottleneck and allow local textile companies and even similar companies across the country to use high-quality, high-end, high-end chemical fiber raw materials with advanced international standards, after careful investigation and research, Ehan Hangen decided to launch a 600,000-ton polyester spinning project in 2002. In May 2004, the first phase of the project was formally put into operation. The main spinning products include POY, FDY, and DTY. In addition to the scale production of ultra-fine fibers, we also successfully developed moisture-wicking functional fiber products. For a time, many famous textile companies from home and abroad became customers of Shenghong.
Yu Hangen said that compared with ordinary chemical fiber products, the profit of ultra-fine fibers can be increased by 50%. While the use of ultra-fine fiber textile products, although the cost slightly improved, but the profit rate can be increased by 20% -30%.
At the China International Chemical Fibre Conference held on September 13, the chairman of China National Chemical Fiber Industry Association Zheng Zhiyi stated in the theme report titled "Future Technology Development Direction of China Chemical Fiber Industry" that the era of China's chemical fiber development relying on total output has come to an end. Has entered the industry a new era of enhanced development. China's chemical fiber industry will bid farewell to low-level competition and make every effort to enter the field of high-tech fiber, and strive to achieve major breakthroughs.
On September 15th, leaders of several associations and experts who had just finished the China International Chemical Fiber Conference came to the Shenghong Group. They highly praised this private enterprise just over 15 years old and believed that technological innovation is the Chinese chemical fiber enterprise. Way out.
According to reports, in 2006, the second phase of the Shenghong Chemical Fibre began construction. At the end of July 2007, it was fully completed and put into production. So far, Shenghong Chemical Fiber has 600,000 tons of melt spinning capacity and has become a world-class microfiber production base.
"The production of Shenghong Chemical Fiber Co., Ltd. will reach 300,000 tons this year after it is put into operation. This exceeds the total output of Europe, the United States, Japan and South Korea and other countries and regions. The production capacity ranks among the top in the world." With the launch of the Microfiber Phase II project, the director of Shenghong Group The dream of the Chairman of the Board, Rui Hangen, to create a global microfibre base has become a reality.
Microfiber generally refers to a product with a single-filament fineness of less than 0.5 DPF. It is called a new-generation synthetic fiber and represents a new synthetic fiber that is developed in the direction of high-tech and high-fidelity chemical fiber. It is mainly used in high-end fashion fabrics. , high-density fabrics, high-performance fabrics, imitation peach skin fabrics, artificial suede, advanced audition paper, gas filtration.
In recent years, relevant state departments and trade associations have been calling on domestic chemical fiber manufacturers that have the ability and strength to accelerate the pace of development of polyester ultra-fine denier filaments, and to produce high-quality polyester superfine denier filament products as soon as possible to meet downstream users. The demand for medium-to-high-grade fabrics has brought the domestic textile industry to a new level, and has subsequently shaken off various thresholds encountered when China's "cheap textiles" were exported.
The National Textile and Development Commission recently issued a report on the trend and forecast of the textile industry, which shows that China’s textile industry’s exports are facing unfavorable factors such as the appreciation of the renminbi. In 2007, the export growth rate will be lower than the level in 2006, and the annual export value is expected to be US$165 billion, an increase from the same period of last year. 16%.
The report pointed out that in 2007 China's textile industry faced four major unfavorable factors, among which the special point was that the textile industry will still face the shortage of domestic cotton and the long-term dependency of imports of chemical fiber materials.
The viewpoint in the report was confirmed in Shengze Town, China's silk capital. This is the important town of China's textile industry. Historically, it has been known as “the sunrise is ten thousand and the clothing is being taken care of.†There are more than 5,000 textile companies and more than 100,000 looms in the local area. More than 40 billion yuan worth of fabrics are traded here each year. However, one problem that cannot be ignored is that most of the polyester filaments used in local fabrics have been supplied by foreign sources in the past few years. In particular, ultra-fine denier filaments have always been imported, resulting in increased costs and reduced competitiveness.
In order to break this bottleneck and allow local textile companies and even similar companies across the country to use high-quality, high-end, high-end chemical fiber raw materials with advanced international standards, after careful investigation and research, Ehan Hangen decided to launch a 600,000-ton polyester spinning project in 2002. In May 2004, the first phase of the project was formally put into operation. The main spinning products include POY, FDY, and DTY. In addition to the scale production of ultra-fine fibers, we also successfully developed moisture-wicking functional fiber products. For a time, many famous textile companies from home and abroad became customers of Shenghong.
Yu Hangen said that compared with ordinary chemical fiber products, the profit of ultra-fine fibers can be increased by 50%. While the use of ultra-fine fiber textile products, although the cost slightly improved, but the profit rate can be increased by 20% -30%.
At the China International Chemical Fibre Conference held on September 13, the chairman of China National Chemical Fiber Industry Association Zheng Zhiyi stated in the theme report titled "Future Technology Development Direction of China Chemical Fiber Industry" that the era of China's chemical fiber development relying on total output has come to an end. Has entered the industry a new era of enhanced development. China's chemical fiber industry will bid farewell to low-level competition and make every effort to enter the field of high-tech fiber, and strive to achieve major breakthroughs.
On September 15th, leaders of several associations and experts who had just finished the China International Chemical Fiber Conference came to the Shenghong Group. They highly praised this private enterprise just over 15 years old and believed that technological innovation is the Chinese chemical fiber enterprise. Way out.
According to reports, in 2006, the second phase of the Shenghong Chemical Fibre began construction. At the end of July 2007, it was fully completed and put into production. So far, Shenghong Chemical Fiber has 600,000 tons of melt spinning capacity and has become a world-class microfiber production base.
New Densen Casting And Forging I & E Co., Ltd. , http://www.yassiancast.com