More and more factories are reducing the use of cutting fluids in machining, and micro-lubrication is becoming more and more popular. This is because micro-lubrication on the one hand can improve the environmental impact of the cutting fluid, on the other hand, it brings good economic benefits.
The introduction of micro-lubrication technology can be traced back more than 20 years ago, and its theoretical foundation is based on the development of cutting tools and new materials and the concept of high-speed cutting. The development of new materials and tooling technology has made dry machining a reality, but dry machining has increased the cost of cutting tooling. Micro-lubrication technology is a technology that provides a small amount of lubricant that only meets lubrication requirements between the cutting tool and the workpiece. This technology not only extends the life of the cutting tool, but also reduces the production of dry-processed metal dust. The micro-lubrication system can replace the cutting fluid system to provide lubrication for cutting tools, and has been widely used. The micro-lubrication technology is more suitable for high-speed cutting. Practice has shown that the use of micro-lubrication technology can shorten the processing time, and the advantages of using micro-lubrication technology can be summarized as follows:
1. Avoid occupational diseases that may be caused by cutting fluids;
2, no cutting fluid procurement, use and waste disposal costs;
3. After the processing with the micro-lubrication technology, the workpiece and the chip are dry and do not need to be cleaned;
4. The use of micro-lubrication technology can effectively reduce the dust in the workshop and improve the working environment;
5. The machine footprint is significantly reduced and the machine layout is more compact.
Beijing Peifeng Technology Co., Ltd. has accumulated rich experience in the application of micro-lubrication technology. For more than ten years, it has served many manufacturing companies including Shenyang Machine Tool. We are willing to help you apply the micro-lubrication technology in the field of machining, save energy and reduce emissions, improve the environment and reduce operating costs.
The introduction of micro-lubrication technology can be traced back more than 20 years ago, and its theoretical foundation is based on the development of cutting tools and new materials and the concept of high-speed cutting. The development of new materials and tooling technology has made dry machining a reality, but dry machining has increased the cost of cutting tooling. Micro-lubrication technology is a technology that provides a small amount of lubricant that only meets lubrication requirements between the cutting tool and the workpiece. This technology not only extends the life of the cutting tool, but also reduces the production of dry-processed metal dust. The micro-lubrication system can replace the cutting fluid system to provide lubrication for cutting tools, and has been widely used. The micro-lubrication technology is more suitable for high-speed cutting. Practice has shown that the use of micro-lubrication technology can shorten the processing time, and the advantages of using micro-lubrication technology can be summarized as follows:
1. Avoid occupational diseases that may be caused by cutting fluids;
2, no cutting fluid procurement, use and waste disposal costs;
3. After the processing with the micro-lubrication technology, the workpiece and the chip are dry and do not need to be cleaned;
4. The use of micro-lubrication technology can effectively reduce the dust in the workshop and improve the working environment;
5. The machine footprint is significantly reduced and the machine layout is more compact.
Beijing Peifeng Technology Co., Ltd. has accumulated rich experience in the application of micro-lubrication technology. For more than ten years, it has served many manufacturing companies including Shenyang Machine Tool. We are willing to help you apply the micro-lubrication technology in the field of machining, save energy and reduce emissions, improve the environment and reduce operating costs.
WinnerLifting provides End Fittings especially for those used with ratchet lashing belts or truck bed tracks.
We have Single Stud Fittings,Double Stud Fittings,multi stud fittings,etc.
Sometimes we also call these as automotive fitting,zinc steel system fitting,etc.
These end fittings are usually attach to certain metal tracks so as for fixing,acting together like anchors.
Pleasae contact us for more professional advices!
End Fittings
End Fittings,Single Stud Fittings,Recessed Pan Fittings,Double Stud Fittings
WINNERLIFTING(H.K.)INT'L TRADING LIMITED. , https://www.massagebeds.nl