Hydraulic chain shear [Supply Wing Hang SMJ Chain Chain Hydraulic Shear] price, manufacturer, picture, chain chain hydraulic shear use, technical parameters and usage methods

Mining chain hydraulic shears use:

The split type anchor chain (circle chain) disconnector produced by Jinhang Winghang Industrial and Mining Equipment Co., Ltd. is mainly used for the shearing of the anchor chain (ring chain) in various industries, mines, metallurgy, petroleum, bridges, and fire protection departments. The hydraulic chain shear used in mining adopts a split type structure, which is small in size, light in weight, easy to operate, flexible in use, and powerful in cutting off. In particular, the hydraulic chain shear for mining does not require power, and is more suitable for field operations.
The components of the hydraulic chain shears for mine use are compact in structure and are processed with advanced materials using advanced technology. It is the ideal anchor chain (ring chain) cutting tool in China.

Mining chain hydraulic shear technical parameters

Mining chain hydraulic shears use methods and precautions
1. The mining chain hydraulic shears are used to cut off Φ26-42mm ring chain metal materials. When using, adjust the bolt according to the diameter of the ring chain, and place the chain of the anchor chain at a right angle to the cutter head.
2. When using, add the 32# anti-wear hydraulic oil to the manual pump, and then connect the manual pump quick connector with the main engine cylinder, and screw the oil drain screw on the oil pump to work. Also, when the work is done, loosen the drain screw and the working cylinder will automatically retract.
3. Before using, return several working trips and wait for each department to be flexible. No oil leakage can be used.
4. If there is a phenomenon of idle during use, you can first loosen the oil drain screw on the pump body, turn the pump body vertically up and down a few times, then tighten the oil drain screw to continue using.
5. Do not remove the quick connector when there is a load, so as to avoid accidents and damage to the parts