What is the dew point of the dryer?

A dryer is a mechanical device that uses heat to reduce the moisture of a material and is used to dry the object. The dryer vaporizes the moisture in the material by heating to obtain a solid material having a specified moisture content. The purpose of drying is for the purpose of material use or further processing.

We often hear people say, what is the dew point of the dryer? I am also very curious, what exactly does this dew point mean? After reading the information, the so-called dew point refers to the temperature at which the saturated water vapor in the air condenses and dews. At the relative temperature of 100%, the temperature of the surrounding environment is the dew point temperature.

The lower the dew point temperature is than the temperature of the surrounding environment, the less the possibility of condensation, which means that the drier air is, the dew point is not affected by temperature, but it is affected by pressure. Do you understand that the dryer the air, the lower the possibility of dew point.

The future development of the dryer will be in-depth study of the drying mechanism and material drying characteristics, mastering the optimal operating conditions for different materials, developing and improving the dryer;

In addition, large-scale, high-strength, high-economic, as well as improved adaptability to raw materials and product quality, is the basic trend of dryer development; at the same time further research and development of new efficient and adaptable dryers, such as combined drying Machine, microwave dryer and far infrared dryer.

API 5L Line Pipe SSAW Steel Pipe

Certificate: EN10217, EN10219, API 5L PSL1/ PSL2, API 5CT

Out Diameter: 168.3mm –3048mm

Wall Thickness: 3.2mm-30mm

Length: Up to 50m

Steel Grade:

API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70

ASTM A252 GR 1, GR 2, GR 3

ASTM A53: GR A, GR B, GR C, GR D

BS 4360: Grade 43, Grade 50

EN: S275, S275JR, S355JRH, S355J2H

Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer`s requirement

Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

SSAW Steel Pipe

Piling SSAW Steel Pipe, API 5L SSAW Steel Pipe, Big Diameter SSAW Steel Pipe, Structural SSAW Pipe

Cangzhou Weiheng Pipe Industry Co.,Ltd , http://www.czweiheng.com