Dongfeng Fureka Aerial Vehicle: It is a hot selling product in aerial work vehicles. This car is exempted from purchase of additional tax, high configuration, low price, economical benefits, beautiful appearance, comfortable driving, and working in enjoyment to make money! The original Dongfeng Freca double-seat chassis (Genius) is a fully-rotary two-folded arm hydraulic multi-purpose engineering vehicle. The Dongfeng Freyka aerial vehicle is widely used in electrical line inspection, advertising photography and landscaping. And other fields. Commonly used for diesel, Yuchai engine, Dongfeng 5-speed gearbox, 7.00-16 nylon tires, 24V power supply. The working height is generally 10-16 meters, and different working heights can be selected according to customer requirements. Provide you with more models of aerial vehicles, pictures of aerial vehicles, aerial work vehicle accessories, and the best prices for aerial vehicles. Consult the sales manager for the details of the Dongfeng Freka Aerial Vehicle.
ã€Main Technical Parameters of Dongfeng Felika Aerial Work Truck】 | |||
product name | Dongfeng Furika radial boom truck | ||
Total mass | 6225 | ||
Rated contained mass | Dimensions | 7550×1980×3150 | |
Maintenance quality | 5900 | The number of passengers in the cab | 2+3 |
Approach / departure angle | 27/15 | Front suspension/rear suspension | 1032/2118 |
Number of axes | 2 | Wheelbase | 3300 |
Axle load | 2050/4175 | Maximum speed | 95 |
other | The Dongfeng Felika aerial vehicle special device extends 1100mm. Side protection is symmetrical with cold-formed channel steel / Q235-A, threaded connection. After the protection of cold bend channel steel / Q235-A, welded connection. The height of the rear protective section is 160mm, the width of the section is 50mm, and the height of the lower edge is 470mm. | ||
[Dongfeng Freka Aerial Vehicle Chassis Technical Parameters] | |||
Chassis model | EQ1060NJ20D3 | Chassis name | Car chassis |
Trade name | Dongfeng Brand | manufacturer | Dongfeng Motor Co., Ltd. |
Dimensions | 5845×1760×2130 | Number of tires | 6 |
Approach / departure angle | 27/23 | Tire specifications | 7.00-16, 6.50-16, 7.00R16, 6.50R16 |
Number of leaf springs | 8/9+5,6/8+4 | Front track | 1506,1442 |
Fuel type | Diesel | Rear track | 1466,1458 |
Emission Standards | GB3847-2005, GB17691-2005 State III | ||
engine model | Engine manufacturer | Displacement | power |
CY4102-C3F YC4F90-30 YN30CR | Dongfeng Chaoyang Diesel Engine Co., Ltd. Guangxi Yuchai Machinery Co., Ltd. Chengdu Yunnei Power Co., Ltd. | 3856 2659 2977 | 70 66 76 |
Power take-off device : Dongfeng Felika aerial work truck is composed of oil pump, power take-off device, electric control switch and pneumatic solenoid valve. It is a power take-off gear through the on/off of the power take-off clutch electric switch installed in the cab of the car. It engages or disengages with the power take-off output tooth in the car gearbox, so that the oil pump can work or stop. (Note: When the car is moving, the power-taking tooth in the power take-off should be disengaged and the oil pump is not working)
Slewing mechanism : Dongfeng Felika aerial work truck is composed of hydraulic motor, gear reducer and slewing ring. Its working principle is: the hydraulic motor drives the reducer, and the pinion gear on the output shaft of the reducer rotates to push the slewing bearing to make it rotate.
Hydraulic system : Dongfeng Furika boom type aerial working platform is powered by a fixed pump, the working pressure of the system is 16Mpa, and the flow rate is 25L/min. The working pressure is set by the relief valve (the company has adjusted it when leaving the factory) When the power take-off gear is engaged, the main oil pump is driven, and the oil in the fuel tank is output through the oil pump and reaches the outrigger operation valve. After the operation of the leg is completed, the dispensing handle is dialed to the upper car. At this time, the hydraulic oil is switched from the leg oil circuit to the upper car, and the upper car section can be operated.
Operating System : Dongfeng Furika crank aerial work truck can realize the conversion of various functions through the operating system. By manipulating the handle of the multi-way valve, the telescopic legs and the working arm can be rotated up and down. (When operating the multi-way valve, a power take-off should be hung to drive the pump to work)
Advantages of the product : The main structure of the Dongfeng Furika boom type aerial work truck is provided with a lifting structure (limited to one ton), and the upper arm, lower arm, slewing and lifting hydraulic systems are all unique stepless speed control systems with energy saving and Flexible, stable, safe and reliable. The legs can be divided and adjusted to achieve leveling of the entire vehicle on a flat road. The Dongfeng Furika radial arm hydraulic and electrical control system is equipped with a variety of limit devices and engine emergency flameout device, the failure automatically cut off the power or stop the engine to ensure safety, electric operating system using waterproof switch to avoid the switch Water, rust leakage problems.
Scope of work : Dongfeng Furika boom type aerial work vehicles are widely used in electrical line maintenance, street lamp maintenance, aerial work cleaning, landscaping, electricity, communications, street lamps, traffic police, highways, cable television, shipbuilding, construction, and gardens. ,Advertising,Photography,Large Enterprises,etc.
Inverter TIG Pulse Welding Machine
Inverter TIG Pulse Welding Machine,Arc Welding Equipment ,Inverter Mig Welder ,Aluminum Welding Wire
Welding Equipment Co., Ltd. , http://www.nbweldingmachine.com