On the night of November 4, 2015, due to the combined effect of cold and warm air, a large range of rain and snow will occur in the central and eastern regions of China.
Rain and snow will increase after winter
Into winter, China's many highways to disable the "watering device" has entered the severe investigation stage, otherwise it will face 500 yuan fine.
Just a few days ago, the high-speed traffic police in Shanxi carried out a centralized special rectification of large trucks that had illegally installed showers.
In the course of nearly a week of operations, 23 people were investigated and educated.
In order to solve the problem of overheating of the vehicle brakes and maintain the braking characteristics of the brakes, many trucks have installed a “watering device†without permission. After the vehicle that used the sprinkler passes through, it will leave behind water on the road surface.
At about 11pm on November 8, 2014, when a heavy-duty coal semi-trailer with the license plate No. HE8132 was driving to a length of 830km+600m in the area, the semi-trailer rolled over due to dark ice on the road surface, resulting in driving. Zhang was injured and the goods shipped were scattered. Although dozens of people in traffic police, highway administration, conservation, etc., have been cleared at the scene, due to a full truckload of coal paved with roads, the cleaning work is very difficult and the traffic control process lasts for 10 hours.
According to the provisions of Article 16 of the "Road Traffic Safety Law", no unit or individual may assemble a motorized vehicle or change the structure, structure or characteristics of a registered motor vehicle without authorization.
The unauthorized installation of a shower device is an illegal reconstruction of the original structure of the vehicle. According to the provisions of Article 16 of the "Road Traffic Safety Law" and Article 57 of the "Registration Regulations of the Motor Vehicle," the unauthorized alteration of the vehicle's appearance and registration has been made. The relevant technical data was ordered by the traffic administrative department of the public security organ to be reinstated and a fine of 500 yuan was imposed.
The traffic police department recommends:
Freight vehicles can be braked in other ways. The first is to raise the awareness of active safety. In the face of long-term downhill slopes, avoid using the brakes too often and use low gears to maintain the vehicle's speed.
In the event of an emergency, it is necessary to grab a low gear, make full use of the safeway on the side of the road, or rely on roadside slope protection and guardrails to slow down.
In addition, an auxiliary brake device such as an engine brake and a retarder may be installed on the vehicle, which not only has a good braking effect but also greatly reduces the driving intensity of the driver.
Fast retarder is tailored for the heavy truck whole new generation of automotive brake products with independent intellectual property rights, to fill the gaps in the market, the key core technology has reached the international advanced level. Its unit braking torque and braking power are large, the braking force is not degraded, the braking is soft, there is no impact, and it can work for a long time without thermal decay, and the structure is compact and light. The vehicle has good comfort, short axial dimension, easy installation and maintenance, and has the advantages of prolonging the service life of the brakes and operating economy.
Fast Retarder
With the maturation of Fast Retarder's products and rising market share, major host manufacturers’ enthusiasm for this product has been rising. Since it was put on the market, it has been well received by the majority of drivers. In cloud, Guizhou, Sichuan and other places, with long downhill and multi-bending conditions, it has exhibited excellent adaptability, and has fully met the development needs of heavy-duty gear, large-tonnage, high-horsepower, high-speed and different users. Personalized requirements provide reliable security protection and efficient deceleration braking for medium and heavy trucks.
ER70S-6 Welding Wire
Description: ER70S-6 Welding wire is a low alloy steel gas shielded welding wire, protected with pure Co2 or Ar+CO2 gas. Stable arc, low spatters, excellent fabrication weldability and lowsensitivity of weld gas porosity can be obtained during welding. It is suitable for all position welding especially with large welding current rang. It can show very good welding performance.
Applications:
Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel, such as vehicles, bridges, construction and mechanical structures etc.
Instructions:
A. Suitable for using shielding gas at the speed of 20-25 liters per minute.
B. Windshield must be set up in the welding zone, due to gas porosity may be caused be strong wind.
C. Wind extention should be 10-20mm if the current range is under 300A and if above 300A,20-25mm.
Aws E70S-6 Welding Wire,70S-6 Welding Wire,Rutile Welding Rod,2.5Mm Welding Rod
Dingzhou Jinlong Metal Production Co., Ltd. , https://www.weldingelectrodefactory.com