Potash mine ore mining

Solid deposits have a long history of dry mining and water harvesting. In recent years, some countries have gradually replaced the room-column method with the water-soluble method. Dry mining is basically the same for all kinds of salt deposits. At present, the traditional house-column method developed by the shaft is widely used in foreign countries, and this method is also adopted in the Yunnan Kanye well potash mine. The shaft has strong adaptability to various salt deposits, and is especially suitable for mines with high grade and buried depth of less than 1000m and mines with large production capacity. Most of the shafts mined are concrete-lined circular wells with a small number of rectangular wells. The diameter of the circular well is about 4.5 to 5.5 m, and the section of the rectangular well is generally 2 m × 4 m to 2 m × 6 m. Mines and pillars are generally rectangular and square. The mining width of the rectangular mining room is generally 15-20m, the length is 100-200m, the height is 6-10m, and the well depth is several hundred meters to thousands of meters. Shaft production capacity, foreign single-well production capacity of several thousand tons / day, Yunnan single wild well single-well several hundred tons to more than 1,000 tons / day. The recovery rate is generally 40% to 60% in foreign countries, up to 75%, and the highest recovery rate of Yunnan Kanye well potassium mine is 35% to 40%. Water extraction is divided into diverticulum water dissolution method and drilling water dissolution method. The diverticulum water-dissolving method is used in special cases where there are many sediments and low grades. For example, this method is adopted in the Kanye well potassium mine. Drilling water dissolution method is widely used in foreign countries. The drilling water-dissolving method can be divided into single well operation and multi-well operation. This method is to install a pipeline in a borehole up to 2000m deep, communicate with the underground ore body, inject fresh water into the ground through the water injection pipe, etch the ore body, and create an artificial cavity for containing the dissolved salt solution, which will be obtained. The solution is pumped to the surface and concentrated by manual or natural evaporation to separate the product. The obtained mother liquor is adjusted by adding water and returned to the ground for repeated use. This method is widely used in Sichuan and Hubei to mine salt mines. Compared with general room and pillar mining, the main advantages of drilling water-soluble mining are: deep mining deposits can be mined up to 1000-2000m, and Sichuan water mining depth is 1200m; suitable for mining ore bodies with small thickness and low grade. The mining construction time is short, the labor intensity is small, and the operation is easy; there is no safety problem in the underground operation; the mining transportation process can be omitted. The main disadvantages of the water-soluble method are: large-scale ore body collapse will occur; thin-layer ore body drilling costs are high; pipeline corrosion is severe; recovery rate is lower than dry mining. The recovery rate of foreign housing column method is 40% to 50%, the borehole water dissolution method is 2% to 35%, and the single well convection method is 2%. China's single well convection method has a high recovery rate, generally 7% to 8%.

Glue Type Folding Box Machine

Box Gluing Machine,Automatic Folder Gluer Machine,Carton Folder Gluer Machine,Glue Type Folding Box Machine

Dongguan City Li you machinery and Equipment Co., Ltd. , https://www.gdliyou.com