Qiu Xiaohua, deputy director of the National Bureau of Statistics, said that the potential danger of economic growth slowdown in 2001 cannot be underestimated

Dong Yulin, an expert on the trademark law of the Trademark Office of the State Administration for Industry and Commerce, who participated in the formulation and revision of the Standards Law, introduced that the current standardization method was passed in 1982. At that time, there were only more than 30,000 trademarks in the country, and the total number of trademarks in China has reached 10,000. . There is a growing need for screening methods to regulate and adjust. Dong Yulin said that in the past 20 years, the national economic environment has undergone tremendous changes.
When the standardization method was introduced, China’s economic component was relatively simple. Nowadays, various economic components have been established, and many new industries have been created. Moreover, China has also joined a series of international treaties on trademarks, especially in the face of joining the WTO. The intellectual property agreement suddenly = trade using domestic and foreign markets to think about international treaties. In addition, the big coffee, the operability is not strong, there are hundreds of out of the =, should be new = potential needs. The Standing Committee of the Ninth National People's Congress has revised and revised the stipulations of the stipulations. In addition to the principle of internality, the draft discusses the restrictions on the main body of trademark rights, and clearly stipulates that natural persons can also apply for registration of trademarks. This modification greatly expands the subject of trademark rights. He said that it is expected that the revised draft standard will be adopted and implemented by the legislature, and the number of registered trademarks in China will increase substantially. Dong Cailin said that China has implemented the principle of “first” in the trademark right, that is, whoever applies for the trademark first, who belongs to it. This principle has played a fixed role in increasing people's legal awareness of registration, but there are also many questions. The prominent article is difficult to ensure fairness in actual operation. Many companies have spent a lot of effort to create trademarks that have caused huge losses to these enterprises and also undermined the normal market order. The revised draft proposes to make adjustments to this and introduce the use of prior principles as appropriate to constrain the squatting of trademarks used by others.
Dong Yulin said that the stipulation method is an important law under the conditions of a socialist market economy and is related to the vital interests of many enterprises and individuals. I hope that this law will be revised to better adapt to social development and better integrate with the international community.
Qiu Xiaohua, deputy director of the National Bureau of Statistics, said that the potential danger of economic growth slowdown in 2001 cannot be underestimated. In the past two years, China’s national economic development has undergone an important turning point. The growth of 00 is expected to reach 8. However, due to the slow growth of farmers’ income, private investment growth is still slow and prices are still relatively low. Low-level international oil prices remain at a relatively high level. Therefore, the potential danger of China's national economic growth slowdown in 2001 cannot be underestimated. It is expected that in 2001, China's comprehensive effect of increasing measures and stable monetary policy will gradually emerge, structural adjustment and state-owned enterprise reform. Positive progress has been made and the vitality of the micro-subjects has increased. Two years have become the best year for the Chinese economy since the Asian financial crisis. Specifically, domestic production and investment consumption has accelerated to rebound; foreign trade has maintained rapid growth. The financial and financial situation has been stable and the international balance of payments has been in good shape. In the previous quarter, the country will be around 7.5.
The gross domestic product was 62,124 billion yuan, according to comparable calculations in the world economy and China's economic price, compared with the 19-year growth prospects seminar, the National Bureau of Statistics 8.2, the growth rate was faster than the same period, eight hundred deputy director Qiu Xiaohua to 2001 In the past year, China’s economic scores have initially reversed the forecast of the growth rate of the previous years.
Qiu Xiaohua said that due to the decline in active fiscal continuation.
From the perspective of production, the acceleration of industrial production is the main factor for the steady growth of the national economy. In the first quarter, China's industrial production increased by 10% year-on-year, and the contribution rate to economic growth reached nearly 601. At the same time, the development of the primary industry has also accelerated. However, due to the sharp reduction in grain production, agriculture has experienced low-speed growth, which is the year-on-year growth since the 1990s. Slow for 1 year.
From the perspective of demand, the accelerated growth of investment and the steady growth of consumption are the main driving forces for the steady growth of the national economy. In the previous quarter, the growth rate of fixed assets investment in the whole society was around, and the contribution rate of investment to economic growth reached 4 or so. The total retail sales increased by 9.9, and the contribution rate of consumption to the growth of the oil and chemical industry in 20 countries reached nearly 60.
Qiu Xiaohua believes that the reason why industrial production maintains the momentum of accelerating growth is firstly benefited from the deepening of the reform and development of state-owned enterprises in the previous quarter. The growth rate of state-owned and state-owned holding enterprises reached 10.5%, which is related to the joint-stock enterprises and share-holding enterprises of Lanzhou enterprises. Compared, the gap has narrowed significantly. Secondly, thanks to the adjustment of product structure, the results have been achieved. Before the production of surplus products was controlled, the coal output decreased by 0.98 in the first quarter, steel increased by 2.8, and fell by 3. on the same period of last year. The new technology products continued to grow rapidly. The microcomputer semiconductor integrated circuit mobile communication equipment in the previous quarter once again benefited from the market situation. it is good. The industrial production and sales connection has continued to improve since 2000, and the sales rate of industrial enterprises in the previous quarter was 97.3, an increase of 0.8 percentage points over the same period in 1999.
Looking forward to 2,01, Qiu Xiaohua believes that the continued implementation of the proactive fiscal policy in the early ten years of the country's macro-control capacity and the development of the western development strategy are all favorable factors for the continued rapid development of national smuggling. However, the lack of effective demand has not yet been solved by roots, especially the slow growth of farmers' income, the growth of non-government investment is not fast; although the currency tightness has improved, but the low price question still highlights the unreasonable structure, it is impossible to get big in the short term. improve. Therefore, if properly regulated, the national economy is still expected to maintain rapid growth, but the danger of slowing economic growth in 2000 can not be underestimated.
The regulatory measures for mercury content in import and export batteries are for the purpose of governance and protection of China's ecological environment. The National Entry-Exit Inspection and Quarantine Bureau has recently issued a regulatory measure for the mercury content of export battery products.
The Measures stipulates that the inspection and quarantine institutions shall file a system for the import and export of battery products. The applicants for imported battery products shall apply to the relevant inspection and quarantine institutions for filing before importing the battery products. The manufacturer of the export battery products shall go to the local inspection and quarantine institution before export. Apply for the special inspection system for mercury content in the actual hall. The specific testing work shall be carried out by the mercury content testing laboratory approved by the State Inspection and Quarantine Bureau. The laboratory shall issue a confirmation certificate for the mercury content of the battery product, and the sample test shall be unqualified. The laboratory issued a battery product pro-content test failure notice. Battery products that fail to be registered or fail to pass the mercury content test are not allowed to be imported or exported.
This method was officially implemented on January 1, 2001.
The dicing held in Japan, together with the 1st China Accounting Research Association's new press conference, revealed that in response to Ding, China is intensifying the drafting of a new accounting system so that China's accounting system can basically be coordinated with international notification practices. The new accounting system is expected to be completed in early February. After approval by various statutory procedures, it may be implemented in advance by companies with conditions such as listed companies.
China's current accounting system is quite different from the international notification system, so that foreigners do not understand the financial reports of Chinese companies, which creates a major obstacle to the linkage of state-owned enterprises to overseas listings and domestic and foreign securities markets. It is understood that in the future, in addition to financial enterprises and small enterprises that are not foreign-funded enterprises, it is necessary to implement a comprehensive accounting system. The new accounting system is relatively close to the current accounting system of the company limited by shares, but it will be somewhat improved and improved in the accounting of fixed assets intangible assets. Therefore, listed companies will not have any obstacles in implementing this new system.
The accounting system will have major reforms

Materials	Carbon Steel: ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH
	P250GH, P280GHM 16MN, 20MN ,20#
	Stainless Steel: ASTM A182, F304/304L, F316/316L
Types	Slip On Plate Flange/Plate Flange , Slip On Hub Flange/Bossed
	Welding Neck Flange/WN flange/ Loose Flange/Lapped Flange /Backing Flange
	Blind Flange/Blank flange, Lap Joint Flange /LJ Flange
	Socket Weld Flange/SW Flange Threaded Flange/Screwed Flange
	Loose Flange/Lapped Flange Backing Flange RTJ /o-Ring
	Custom Flange/Special Flange Hot/Cold/Electro Gavanized Flange
Standards	ANSI/ASME/ASA B16.5 FLANGES, ANSI B16.47 A/B FLANGES
	JIS B 2220 FLANGES, KS B 1503, DIN SERIES, UNI, EN1092-1, BS4504
	BS 10 TABLE D/E/F FLANGES, SANS 1123 FLANGES/SABS 1123
	GOST12820-80/GOST12821-80, NFE29203/NS/AS/ISO/AWWA FLANGES
Pressure &Ratings	150LBS, 300,600,900,1500,2500 ANSI, ASA B16.5
	PN6 PN10 PN16 PN25 PN40 PN64-DIN/UNI
	PN6 PN10 PN16 PN25 PN40 PN63-EN1092-1/BS4504
	PN0.6Pa, PN1.0Pa, PN1.6. PN2.5,PN4.0-GOST12820-80
	PN0.6Pa, PN1.0Pa, PN1.6. PN2.5,PN4.0, PN6.3. -GOST12821-80
	600kPa, 1000.1600.2500.4000.-SANS 1123
	5KG, 10KG, 16KG, 20KG, 30KG, 40KG-JIS B2220/KS B1503
	TABLE D, TABLE E ,TABLE F-BS 10, AS2129
	CLASS D, CLASS E, CALSS F, AWWA C207
Surface Treatment	Rust Prevention , Black Paint Coating or Phosphating Treatment with Black Color
	Varnish Paint Coating, Varnish Oil Coating,
	Electro Galvanizing Coating (Cold Galvanizing, Color Golden or silvery white, Coating thickness 20~30μm)
	Hot Dip Galvanizing Coating (Coating Thickness 200μm around)
Technical	Forging
Application	Water works, Shipbuilding industry, Petrochemical & Gas industry, Power industry, Valve industry
	and general pipes connecting projects etc.
Inspection	Quality Control System-Well Equipments and Machinery-Well Workers and Engineers
Packing	Wooden Pallets or Wooden Cases or As Customers' Requirements
Payment Terms	L/C Or 30 % Advance By T/T and The balance Will be Paid After the copy of B/L
Delivery Time	30 Days \after the Advance or the L/C
After-Sales Service	Orders and Products Tracking System

SS316 Steel Flange

SS316 Steel Flange, SS316 Forged Flange, Stainless Steel Flange SS316

Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd. , https://www.jimengflange.com