Jingjiang Becomes Auto Parts Industry Base

Jingjiang Becomes Auto Parts Industry Base The reporter learned yesterday from the Municipal Economic and Information Commission that Jingjiang was recently recognized by the Provincial Economic and Information Commission as the “Automobile Component Industrial Base in Jiangsu Province”, which shows that the development of the Jingjiang Auto Parts Industrial Cluster has achieved remarkable results.

At present, Jingjiang Auto Parts Industry has formed the advantages of industrial cluster development. There are about 300 special-purpose vehicles, auto parts and related companies in the city, with an annual sales of over 10 billion yuan, accounting for about 10% of the industrial economy, and the emergence of new-generation automobiles. Spare parts such as parts and components, Huada Auto Parts, Haoyue Auto Lock, Hengli Brakes, Hengyi Auto Parts, Chenyang Electric Light Source, Gelton Driveshaft, Huatong Electromechanical, Gold Card Auto Parts, Everlasting Coating, Haori Auto Parts, etc. There are 22 million yuan enterprises. Under the situation of increasing downward pressure on the economy this year, the Jingjiang Auto Parts Industry still stands out, and the output value of the auto parts industry in the first 9 months is up 42% year-on-year, making it the largest increase in the city's industrial sector.

According to Sun Xueshan, deputy director of the Municipal Economic and Information Commission, Jingjiang’s auto parts industry has distinct characteristics. First, the advantages of industrial clusters are obvious. A group of enterprises with a size exceeding 500 million yuan and over 1 billion yuan has emerged; the second is the focus on misplaced development, with more than 300 products. Respectively do their own special, strong, product market is also dislocation development; Third, leading enterprises into sub-sectors "single champion", Haoyue car locks, Glenton drive shaft, constant brake, Huatong Electrical and Electronics occupy the top of the peer, new process, Huada's domestic auto parts market share exceeds 20%; Fourth, the competitive advantage in transformation and upgrading is obvious. The backbone enterprise equipment level has reached the domestic first-class, all have CNC machining centers, provincial-level research and development centers.

It is understood that the auto parts industry has become one of the five traditional industries that the city focuses on fostering. By 2015, the invoice sales will exceed 20 billion yuan.

The honors of “Jiangsu Province Auto Parts Industry Base” were Haimen, Gaogang Hi-tech Park and Taixing City, and Rugao was identified as “Provincial New Energy Auto Industry Base”. Yancheng was identified as “Provincial Automobile Industry”. base".

LINA Extrusion Pelletizer

Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives. 

 

LINA Die Surface Hot Cutting Pelletizing Machine

LINA`s die surface hot cutting and air cooling granulating machine is suitable for polymers that are sensitive to heat and long residence time, such as PVC, TPR, PE, cross-linked PE and so on. The flow path of the polymer from the extruder to the pelletizing port should be kept as short as possible with minimal heat. When polymer is extruded through the die surface, the rotating blade cuts the extruded materials into particles. After the pellets are cut, they are removed from the rotary blade and caught by cooling air circulating in the pelletizing room. The air stream preliminary cools the surface of the pellets and takes them out of the pelletizing room and sends them to the cooling zone.

 

Hot Cutting Pelletizing Machine 

 

 

Assembly Ling Diagram of LINA Die Surface Hot Cutting Granulator

LINA Hot Cutting Extrusion Granulator

Advantage of LINA Pelletizing Line

1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.

2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.

3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.

4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.

5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.

6. The hoist adopts automatic return technology to ensure the working efficiency.

7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.

 

Specifications of LINA Extrusion Granulating Line

Name

Mode

Capacity of Kneader

Screw length to diameter ratio

Screw diameter

Dimension

LINA Extrusion Pelletizing Line

LN-10/70

10L

12:01

70mm

2200*1000*1150

LN-10/75

10L

12:01

75mm

2650*1100*1250

LN-35/100

35L

12:01

100mm

3800*1090*1690

LN-55/120

55L

12:01

120mm

3800*1090*1690

LN-75/135

75L

12:01

135mm

3850*2350*3280

LN-110/150

110L

12:01

150mm

5100*2000*1500

LN-110/165

110L

12:01

165mm

5100*2000*1500

Hot Cutting Extrusion Pelletizer

Hot Cutting Pelletizer,Hot Cutting Pelletizing Line,Hot Cutting Pelletizing Machine,Plastic Hot Cutting Granulator

LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com