Black liquor concentration detection in the paper industry

Posted on


Black liquor concentration detection in the paper industry
ATAGO Online Concentration Meters CM-800a and PRM-100a are used for the monitoring of black liquor and green liquor in the paper industry
The refractometer has long been proven to be suitable for the detection of black liquor solids content. The linear change of the refractive index with respect to the black liquor concentration makes it relatively easy and accurate to measure the concentration. The refractometer can measure true solids content without being affected by bubbles, entrained air or suspended matter. This microprocessor-based, easy-to-use design allows you to easily integrate the refractometer into your surveillance and/or control system.
An important area of ​​refractometer application is the pulp washing operation. By monitoring the concentration at the outlet of the pulp washer to meet the needs of the evaporator process. This kind of application installation is very convenient, and greatly reduces the manual sampling workload. In the evaporator, the concentration and temperature output signals can be used to monitor evaporation efficiency, detection problems, and economics of operation. The concentrated concentrated black liquor must be detected before entering the storage tank and the alkali furnace to determine the solids content (concentration) to ensure the safety of operators and alkali furnaces.

ATAGO Online Concentration Meters can be installed in the paper industry inspection sites:

The output of each pulp washing device monitors the efficiency of the washing operation

Evaporator concentration

Into the evaporator dilute concentration

Evaporator output to thick black liquor tank

Black liquor from storage to alkali furnace

The ATAGO Online Concentrator Pipe Adapter has its own high-pressure water flushing line to ensure that the measurement prism will not be affected by impurities and particles sticking to the instrument's prism in the papermaking process, nor should it be used to measure the darker or more bubbles in the medium. The drift phenomenon makes the measured value true and effective.

In order to be able to simultaneously measure various types of aqueous solution concentrations (dilution) with Brix values, the ATAGO Refractometer can directly display the concentration value on the screen. There are more than 80 special scales to choose from.

Description: Spray Dryer drying is the technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as: solution, emulsion, suspension and pumpable paste states ,For this reason, when the particle size and distribution of the ­final products, residual water contents, mass density and the particle shape must meet the precise standard, spray dryer drying is one of the most desired technologies.   Work Principle: High Speed Centrifugal Spray Dryer Series of LPG is gas-liquid co-current flow drying equipment, using high-speed centrifugal atomizer, the liquid will be atomized into fine droplets, then mix with the hot air from the distributor in the dryer, heat and mass transfer exchanges rapidly during the mixing process. In a very short period of time the liquid become dry powdered products. Production control and product quality control is convenient and reliable. It is widely used in the drying production of different types of liquids materials.

Pharmaceutical Engineering Industry

Herbal Extract Spray Dryer,Pharmaceutical Engineering Industry,Pharmaceutical Industry,Pharmaceutical Engineering

Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com