When someone drives a car at night and meets a person who drives the "high beam", it can be considered as an inflated event. I believe many card members are deeply affected by it. Even some people simply turn on the high beams and shoot them. Are you sure that you can use the high beam?
Do you use high light? How to use light properly at night?
â— Misuse of far-reaching light to endanger safety
Why do not 90% of drivers use the high beam light correctly?
In the daily driving process, when the car is on the front side at night, the high beam light can visually blind the driver, and according to the driver's own vision, the blinding duration varies depending on the surrounding environment, but the fastest is also For two seconds or so, during these two seconds, the driver will drive with his eyes closed, and his ability to observe the surrounding pedestrians and the incoming and outgoing vehicles will be greatly reduced.
Do you use high light? How to use light properly at night?
Moreover, drivers who often run at high speeds may encounter that the rear car is always driving far behind, and the lights are reflected by the rear-view mirrors on both sides of the truck into the cab, which also affects the driver's eyesight and brings a huge amount of safety to driving. Risk hidden dangers.
â— Disrupt the four major hazards of high beam
Do you use high light? How to use light properly at night?
Hazard 1: The driver's perception of speed and distance decreases. The line of sight is not good at night, so the human eye will have to discount the speed of the car coming to the opposite side. In such a situation, the interference of the high beam to the human eye will accelerate the judgment.
Do you use high light? How to use light properly at night?
Hazard 2: The judgment of width decreases. The large halo produced by the high beam will occupy a large part of the human eye's vision, thus reducing the driver's judgment on the width of the incoming vehicle and the situation behind it.
Hazard 3: Rear lights will affect the front car. When the rear vehicle turns on the high beam, there will be a large area of ​​halo in the front mirror and two rear mirrors. If you catch the light interior of your car, the car is undoubtedly bright as a light. The halo that appears in front of you will narrow the visibility of traffic in front of you. If you want to line or turn at the same time, it is completely impossible to observe the rear from the rearview mirror.
â— Dealing with high beam is not a tooth
Do you use high light? How to use light properly at night?
The night will be a positive car, if you meet each other to open the high beam, experienced drivers are generally used to flash a few high beams to remind each other to change lights. If the other party disregards it, under normal circumstances try not to turn on the high-beam light, because the far-reaching light will only further increase the security risk, and there is absolutely no benefit at all.
Do you use high light? How to use light properly at night?
So, how can we drive at night to minimize safety risks? The line of sight is not good at night. It is always safer to slow down the vehicle than to turn on the high beam. Driving on some roads with poor lighting conditions, high beam lights can be used interchangeably with low beams to avoid immediate impact on the incoming cars.
Moreover, the most important thing is that when you drive at night, when you come across the car and frequently switch lights to illuminate yourself, you should check if your high beam lights are turning on unintentionally. Never cause serious consequences because of your own inadvertence.
â— Postscript:
Although it was a matter of gnashing the teeth to drive a car at night, it was definitely not a matter of civility but merely increased risk. Instead of spending time trying to govern far-light dogs, it's better to start from oneself and call people around to use the high beam lights correctly, even if it is to change one's driving habits.
Amrta ARV Mini Series could operate perfectly between 52°C in hot summer and -15°C in cold winter making you feel like spring all year around with advanced system design and strict matching test (cooling in -15°C ).
Amrta offers a variety indoor units, more than 100 models of 7 types. Capacity ranges are from 2.2kW to 14kW. It is full compliance with residential and light commercial place. Our systems can operate up to 130% of capacity which allows any system to be designed to the customers and applications needs.
ARV Mini Series ( All DC Inverter )
ARV Series, DC Inverter, ARV 6 Series, ARV Individual Series, ARV Mini Series
Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com