Xk-160 to 560 Series Open Mixing Mill Rubber Machine

Xk-160 to 560 Series Open Mixing Mill Rubber Machine
 

Following is machine application 

it is used for plasticizing rubber (platic), mixing , warming mill ,sheet and crushing recycled rubber , etc 

Following are machine features 

1.The roll is made of alloy chilled cast iron (including separation cast or integrated type). Their surface are hard and wear resistant . The rolls are divined into hollow roll and drilled roll . 

2.The roll is supported on both end by double row spherical bearings . Large machine adopts double bearings .So it had advantages of running smoothly , energy saving , low noise and long service life

3.The roll nip adjustment is driven by the worm and worm wheel .It is simple for operation . The mode of nip adjustment includes manual ,electric and hydraulic adjustment in three forms 

4.Al series mills are equipped with safety device .

5.The roll bearing lubrication : grease lubrication and oil lubrication for order

6.The driving part adopts nylon pin coupling to prevent main parts from being damaged due to the overload of the transmission system 

7.The reducer adopts the hard gear teeth surface reducer . it has low noise ,high transmission efficiency and long service life 

8.The base is integral type , the transmission mode is of closed transmission , so it is safe and easy for use 

9.The user can adopt the stock blender according to the process 

Following is technical parameter 

 

Following are machine pictures 











 

Solenoid Armature makes an very important role in complete Solenoid Valve compared to other solenoid valve parts, so the quality of the armature directly related to the life of complete solenoid valve. Hereby, let me introduce how we control armature quality from character of raw material and how we produce during production.

We also called solenoid armature as solenoid valve armature, solenoid valve stem, solenoid valve core, solenoid Plunger Tube Assembly, solenoid armature tube assembly, Solenoid Armature Assembly, Electromagnetic Valve armature, etc, but all in all, the solenoid armature looks like an opener and closer even like a head in the solenoid valve.

The armature can be divided into four parts roughly, they are fixed core(who with or without shading ring depending on DC or AC voltage type), plunger tube and tube base(has option of stainless steel and brass), mobile plunger(installed with inner and outer spring, top and bottom seal).

The fixed core and movable plunger are made of high magnetic stainless iron, such as 430FR, has good performance of attraction and rust-proof. During production, we doing inspection after each procedure.

The plunger tube is made of H62 brass or seamless 304 stainless steel, the wall thickness from 0.20mm to 2.5mm available. All raw material is inspected before put them into our warehouse.

The plunger tube base is made of H59 brass or 304 stainless steel, with high performance, also we inspected each lot before put them in warehouse.

According to application requirement, choose suitable welding to connect each part, such as laser soldering, argon-arc welding, silver soldering.

The seal can be NBR, Viton, EPDM, Silicon, Teflon, etc. All can be customized as your requirement.

Except this,we also sale for Auto Drain Valve , Air Suspension Valve ,solenoid armature assembly, Forged Brass Valve .
Welcome your any inquiry, we can produce as per your requirements.

Solenoid Armature/Stem

Solenoid Armature, Solenoid Stem,Plunger Tube Assembly,Auto Drain Valve,Air Suspension Valve,Solenoid Armature Assembly,Forged Brass Valve

NINGBO BRANDO HARDWARE CO.,LTD , http://www.brandopneumatic.com