Roof And Wall Panel Roll Forming Machine
Working principle:
Steel sheet is made into roof and wall panel by machine through cold-bend forming technology.
Usage:
Roof And Wall Panel produced by roll forming machine are widely used in construction, transportation and other industries. It is mainly used for roofing and wall of buildings, such as steel structures, airports, storehouses,etc.
Component:
1.Decoiler
2.Roll Forming System
3.Cutting Device
4.Hydraulic Station
5.PLC control system
Working Flow:
Loading coil – decoiling – guide feeding – main roll forming – hydrarlic cutting – finished products
Roof And Wall Panel Roll Forming Machine Technique Parameters:
Processing material: aluzinc/galvanized steel/colored steel coil
Material thickness: 0.3-0.8mm
Main motor power: 4kw(can change as request)
Pump power: 4kw
Shaft diameter: 60mm
Forming steps: 15steps and more
Roller material: high grade 45# steel, hard Chromium plating
Main frame:300H steel
Medium plate thickness: 16mm
Speed:8-12m/min
Material of the cutting blade:Cr12
Control system: PLC computer control
Power supply: 380V, 3 Phase, 60Hz (can change as customers request)
Our Roof And Wall Panel Roll Forming Machine can greatly simplifie the production process and improve production efficiency.
Welcome visit our Factory!
Roof And Wall Panel Roll Forming Machine
Roof Roll Forming Machine,Wall Panel Roll Forming Machine,Roof Panel Roll Forming Machine,Roof Building Roll Forming Machine
CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , http://www.hebeimachine.com