Recently, Mitsubishi Motors Sales (China) Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some of the 2012 imported Outlander EX (3.0L 6A/T) vehicles from June 20, 2014, for a total of 60 vehicles:
(1) The production date is from November 9, 2011 to April 10, 2013. According to the company's statistics, 59 vehicles are involved in mainland China. The recalled range of Outlander EX (3.0L 6A/T) cars has processing problems due to the right front drive shaft oil seal mounting hole of the transfer case. Under the influence of the automatic transmission oil (ATF) oil pressure, the oil seal will fall off, causing the ATF to The internal flow of the transfer case causes the vent of the transfer case to overflow the mixture of the transfer case oil and the ATF, thereby causing a shifting problem and displaying a related warning. If the driving is continued, the driving is impossible, and there is a safety hazard.
(2) The production date is from August 3, 2012 to April 10, 2013. According to the company's statistics, there is one vehicle involved in mainland China. The recall range is insufficient for the clearance between the mounting hole of the torque converter housing and the steering assist pressure tube (P/S pressure tube) for the imported Outlander EX (3.0L 6A/T) car (design factor problem) due to If the driving vibration causes interference, the plating layer of the P/S pressure tube will fall off and be corroded. In severe cases, it will cause perforation and oil leakage, which may cause the steering wheel operating force to become large, posing a safety hazard.
Mitsubishi Motors Sales (China) Co., Ltd. will notify relevant customers through the special dealers from June 20, 2014, and inspect the imported Outlander EX (3.0L 6A/T) vehicles in item (1). The problem vehicle is free to replace the transfer case to eliminate hidden dangers; for the imported Outlander EX (3.0L 6A/T) car of item (2), the steering assist pressure pipe and the steering assist return pipe are replaced free of charge to eliminate hidden dangers.
If you want to know the details of this car recall or have any questions, the relevant customers can call Mitsubishi Motors Sales (China) Co., Ltd. free service hotline / 400-821-6630, or visit the website of Mitsubishi Motors Sales (China) Co., Ltd. http: // for consultation. Users can also visit the AQSIQ website's import and export commodity inspection column (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website (), or call the AQSIQ defect. Product Management Center Hotline for more information.
Due to manual stopper there are low safety performance, easy operation and so on shortcomings, many coal enterprises on the technical renovation, controlled by pneumatic stopper on and off, for example: permanent coal company, xinqiao coal mine was waiting in the manual type stopper on the transmission shaft of add a piece of chain plate and a cylinder, and the original operating handle, at the same time in them pull rod end place receives a double cylinder hole type, through two air inlet control cylinder stopper on and off.Wing coal group, car fleet set coal mine jian-min cao designed a remote control type pneumatic automatic reset squeezer, processing a down side than the resistance of server-assisted squeezer, rotational torque generated by the weight of the difference on both ends stopper can be automatically reset.Pneumatic stopper compared with manual type stopper operation and safety of all had the very big enhancement, not only reduces the labor intensity of workers, and realizes the remote control, therefore has a tendency to gradually replace manual stopper.
Pneumatic Mine Car Arrester,Pneumatic Rail Car Arrester,Mine Car Arrester,Mine Track Arrester
Jining Dongda Electromechanical Co.,Ltd. , http://www.coal-mine-equipment.com